Difference between revisions of "Path Drilling/ru"

From FreeCAD Documentation
Jump to navigation Jump to search
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 157: Line 157:

Revision as of 20:21, 24 February 2020

Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎română • ‎русский
Arrow-left.svg Previous: Path Pocket.svg Pocket
Next: Adaptive Path Adaptive.svg Arrow-right.svg

Path Drilling.svg Path Drilling

Системное название
Path Drilling
Расположение в меню
Путь → Новые операции → Сверление
Быстрые клавиши
Представлено в версии
См. также


The Drilling command generates a drilling Operation in the Job.

Path Drilling Sample.png

Above: Path Drilling operation sample


  1. Invoke the Path Drilling command using several methods:
    • Pressing the Path Drilling.svg Drilling button in the toolbar
    • Using the P D keyboard shortcut.
    • Using the PathPath Drilling.svg Drilling entry from the top menu.
  2. Choose a Tool controller from the pop-up selection dialog window and confirm by pressing OK
  3. The holes available for processing with that Tool diameter will populate the list in the Base Geometry tab. Confirm that the list matches the holes that are intended for processing, and adjust add, enable, or disable, as necessary. Holes can be added by selecting the wall faces of the Holes.
  4. Ensure the Depths, Final Depth is correct, and adjust if not.
  5. Ensure the Heights, Safe and Clearance Heights are correct, and adjust if not.
  6. In the Operation tab:
    • Specify the Retract Height
      • Enable and adjust the following as needed
        • Peck: set the Peck Depth
        • Dwell: set the Dwell time(period) in seconds
        • Use Tip Length
  7. Click OK to generate the drilling path(s)


  • When using edges for Base Geometry, always select the bottom edge of the hole.
  • Always verify the tool chosen is the correct diameter for the hole(s) selected.
  • Peck disabled generates (G81 canned drill cycles). Peck enabled generates (G83 canned drill cycles).
  • Dwell enabled is currently unsupported, but is intended to generate (G82 canned drill cycles).


Note : Not all of these Properties are available in the Task Window Editor. Some are only accessible in the Data tab of the Properties View panel for this Operation.


Note: It is suggested that you do not edit the Placement property of path operations. Rather, move or rotate the Path Job model as needed.

  • ДанныеPlacement: Overall placement[position and rotation] of the object - with respect to the origin (or origin of parent object container)
    • ДанныеAngle: Angle in degrees applied to rotation of the object around Axis property value
    • ДанныеAxis: Axis(one or multiple) around which to rotate the object, set in sub-properties: x, y, z
      • ДанныеX: x axis value
      • ДанныеY: y axis value
      • ДанныеZ: z axis value
    • ДанныеPosition: Position of the object, set in sub-properties: x, y, z - with respect to the origin (or origin of parent object container)
      • ДанныеX: x distance value
      • ДанныеY: y distance value
      • ДанныеZ: z distance value
  • ДанныеLabel: User-provided name of the object (UTF-8)
  • ДанныеDisabled: List of disabled features


  • ДанныеClearance Height: The height needed to clear clamps and obstructions
  • ДанныеFinal Depth: Final Depth of Tool- lowest value in Z
  • ДанныеSafe Height: The height above which Rapid motions are allowed. (Rapid safety height between locations)
  • ДанныеStart Depth: Starting depth of Tool - first cut depth in Z


  • ДанныеAdd Tip Length: Calculate the tip length and subtract from final depth
  • ДанныеDwell Enabled: Enable dwell
  • ДанныеDwell Time: The time to dwell between peck cycles
  • ДанныеPeck Depth: Incremental Drill depth before retracting to clear chips
  • ДанныеPeck Enabled: Enable pecking
  • ДанныеRetract Height: The height where feed starts and height during retract tool when path is finished
  • ДанныеReturn Level: Controls how tool retracts Default=G98


  • ДанныеActive: make False, to prevent operation from generating code
  • ДанныеComment: An optional comment for this Operation
  • ДанныеUser Label: User assigned label
  • ДанныеTool Controller: Defines the Tool controller used in the Operation

Rotation (when available)

  • ДанныеAttempt Inverse Angle: Automatically attempt Inverse Angle if initial rotation is incorrect.
  • ДанныеB_Axis Error Override: Visually orient B(y) rotations to model (error in FreeCAD rendering).
  • ДанныеEnable Rotation: Enable rotation to gain access to holes not normal to Z axis.
  • ДанныеInverse Angle: Inverse the angle of the rotation. Example: change a rotation from -22.5 to 22.5 degrees.
  • ДанныеReverse Direction: Reverse orientation of Operation by 180 degrees.

Tasks Window Editor Layout

Descriptions for the settings are provided in the Properties list above. This section is simply a layout map of the settings in the window editor for the Operation.

Base Geometry

  • Add: adds selected element(s) which should be the base(s) for the path(s)
  • Delete: delete the selected item(s) in the Base Geometry list
  • Clear: clear all items in the Base Geometry list

Base Location

  • Add: add an (X,Y) coordinate location to the current drilling operation.
  • Remove: remove the selected location item(s) from the Base Location list
  • Edit: edit the selected location item


  • ДанныеStart Depth
  • ДанныеFinal Depth


  • ДанныеSafe Height
  • ДанныеClearance Height


  • ДанныеTool Controller
  • ДанныеRetract Height
  • ДанныеPeck
  • ДанныеPeck Depth
  • ДанныеDwell
  • ДанныеDwell Time
  • ДанныеUse Tip Length


See also: FreeCAD Scripting Basics.


#Place code example here.
Arrow-left.svg Previous: Path Pocket.svg Pocket
Next: Adaptive Path Adaptive.svg Arrow-right.svg