Difference between revisions of "Path Drilling/ru"

From FreeCAD Documentation
Jump to navigation Jump to search
(Updating to match new version of source page)
(Updating to match new version of source page)
 
(10 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
<languages/>
 
<languages/>
 +
 
{{Docnav
 
{{Docnav
|[[Path_Pocket_Shape|Pocket]]
+
|[[Path_Pocket_Shape|Pocket Shape]]
|[[Path_Adaptive|Adaptive]]
+
|[[Path_MillFace|MillFace]]
 
|[[Path_Workbench|Path]]
 
|[[Path_Workbench|Path]]
|IconL=Path_Pocket.svg
+
|IconL=Path_Pocket_Shape.svg
|IconR=Path_Adaptive.svg
+
|IconR=Path_MillFace.svg
 
|IconC=Workbench_Path.svg
 
|IconC=Workbench_Path.svg
 
}}
 
}}
Line 13: Line 14:
 
|Name=Path Drilling
 
|Name=Path Drilling
 
|Name/ru=Path Drilling
 
|Name/ru=Path Drilling
|Workbenches=[[Path Workbench/ru|Path]]
+
|MenuLocation=Path → Сверление
|MenuLocation=Путь → Новые операции → Сверление
+
|Workbenches=[[Path_Workbench/ru|Path]]
|Shortcut=P,D
+
|Shortcut={{KEY|P}} {{KEY|D}}
 
|SeeAlso=
 
|SeeAlso=
 
}}
 
}}
 
</div>
 
</div>
  
==Description==
+
==Описание==
  
 
The Drilling command generates a drilling Operation in the Job.  
 
The Drilling command generates a drilling Operation in the Job.  
Line 27: Line 28:
 
{{Caption|Above: Path Drilling operation sample}}
 
{{Caption|Above: Path Drilling operation sample}}
  
==Usage==
+
==Применение==
  
# Invoke the Path Drilling command using several methods:
+
# There are several ways to invoke the command:
#* Pressing the {{KEY|[[Image:Path_Drilling.svg|24px]] [[Path_Drilling|Drilling]]}} button in the toolbar
+
#* Press the {{Button|[[Image:Path_Drilling.svg|16px]] [[Path_Drilling|Path Drilling]]}} button.
#* Using the {{KEY|P}} {{KEY|D}} keyboard shortcut.
+
#* Select the {{MenuCommand|Path → [[Image:Path_Drilling.svg|16px]] Drilling}} option from the menu.
#* Using the {{KEY| Path}} →  {{KEY|[[Image:Path_Drilling.svg|24px]] [[Path_Drilling|Drilling]]}} entry from the top menu.
+
# In the {{MenuCommand|Operation}} section:
# Choose a Tool controller from the pop-up selection dialog window and confirm by pressing {{Button|OK}}
+
#* Select a {{MenuCommand|ToolController}}.
# The holes available for processing with that Tool diameter will populate the list in the Base Geometry tab. Confirm that the list matches the holes that are intended for processing, and adjust add, enable, or disable, as necessary. Holes can be added by selecting the wall faces of the Holes.  
+
#* Select a {{MenuCommand|Coolant Mode}}.
# Ensure the Depths, Final Depth is correct, and adjust if not.
+
#* Optionally enable and adjust the following:
# Ensure the Heights, Safe and Clearance Heights are correct, and adjust if not.
+
#** {{MenuCommand|Peck}} set the {{MenuCommand|Depth}}.
# In the Operation tab:
+
#** {{MenuCommand|Dwell}} set the {{MenuCommand|Time}} in seconds.
#* Specify the Retract Height
+
#** {{MenuCommand|Extended Depth}}.
#** Enable and adjust the following as needed
+
# In the {{MenuCommand|Base Geometry}} section confirm that the list matches the holes that are intended for processing, and adjust add, enable, or disable, as necessary. Holes can be added by selecting the wall faces of the Holes.
#*** '''Peck:''' set the Peck Depth
+
# In the {{MenuCommand|Depths}} section check, and if required adjust, the {{MenuCommand|Start Depth}} and {{MenuCommand|Final Depth}}.
#*** '''Dwell:''' set the Dwell time(period) in seconds
+
# In the {{MenuCommand|Heights}} section check, and if required adjust, the {{MenuCommand|Safe Height}} and the {{MenuCommand|Clearance Height}}.
#*** Use '''Tip Length'''
+
# Press the {{Button|OK}} button to generate the drilling path(s).
# Click {{Button|OK}} to generate the drilling path(s)
 
  
==Notes==
+
==Примечания==
  
 
*When using edges for Base Geometry, always select the bottom edge of the hole.
 
*When using edges for Base Geometry, always select the bottom edge of the hole.
Line 52: Line 52:
 
*'''Dwell enabled''' is currently unsupported, but is intended to generate (G82 canned drill cycles).
 
*'''Dwell enabled''' is currently unsupported, but is intended to generate (G82 canned drill cycles).
  
==Properties==
+
==Свойства==
  
 
''' ''Note'' ''': Not all of these Properties are available in the Task Window Editor. Some are only accessible in the Data tab of the Properties View panel for this Operation.
 
''' ''Note'' ''': Not all of these Properties are available in the Task Window Editor. Some are only accessible in the Data tab of the Properties View panel for this Operation.
  
====Base====
+
{{TitleProperty|Base}}
  
 
Note: It is suggested that you do not edit the Placement property of path operations. Rather, move or rotate the Path Job model as needed.
 
Note: It is suggested that you do not edit the Placement property of path operations. Rather, move or rotate the Path Job model as needed.
Line 73: Line 73:
 
* {{PropertyData|Disabled}}: List of disabled features
 
* {{PropertyData|Disabled}}: List of disabled features
  
====Depth====
+
{{TitleProperty|Depth}}
  
 
* {{PropertyData|Clearance Height}}: The height needed to clear clamps and obstructions
 
* {{PropertyData|Clearance Height}}: The height needed to clear clamps and obstructions
Line 79: Line 79:
 
* {{PropertyData|Safe Height}}: The height above which Rapid motions are allowed. (Rapid safety height between locations)
 
* {{PropertyData|Safe Height}}: The height above which Rapid motions are allowed. (Rapid safety height between locations)
 
* {{PropertyData|Start Depth}}: Starting depth of Tool - ''first cut depth in Z''
 
* {{PropertyData|Start Depth}}: Starting depth of Tool - ''first cut depth in Z''
+
 
====Drill====
+
{{TitleProperty|Drill}}
  
 
* {{PropertyData|Add Tip Length}}: Calculate the tip length and subtract from final depth
 
* {{PropertyData|Add Tip Length}}: Calculate the tip length and subtract from final depth
Line 90: Line 90:
 
* {{PropertyData|Return Level}}: Controls how tool retracts Default=G98
 
* {{PropertyData|Return Level}}: Controls how tool retracts Default=G98
  
====Path====
+
{{TitleProperty|Path}}
  
 
* {{PropertyData|Active}}: make False, to prevent operation from generating code
 
* {{PropertyData|Active}}: make False, to prevent operation from generating code
Line 97: Line 97:
 
* {{PropertyData|Tool Controller}}: Defines the Tool controller used in the Operation
 
* {{PropertyData|Tool Controller}}: Defines the Tool controller used in the Operation
  
====Rotation (''when available'')====
+
{{TitleProperty|Rotation}} (''when available'')
  
 
* {{PropertyData|Attempt Inverse Angle}}: Automatically attempt Inverse Angle if initial rotation is incorrect.
 
* {{PropertyData|Attempt Inverse Angle}}: Automatically attempt Inverse Angle if initial rotation is incorrect.
 
* <s>{{PropertyData|B_Axis Error Override}}: Visually orient B(y) rotations to model (error in FreeCAD rendering).</s>
 
* <s>{{PropertyData|B_Axis Error Override}}: Visually orient B(y) rotations to model (error in FreeCAD rendering).</s>
 
* {{PropertyData|Enable Rotation}}: Enable rotation to gain access to holes not normal to Z axis.
 
* {{PropertyData|Enable Rotation}}: Enable rotation to gain access to holes not normal to Z axis.
* {{PropertyData|Inverse Angle}}: Inverse the angle of the rotation.   '' '''Example:''' change a rotation from -22.5 to 22.5 degrees.''
+
* {{PropertyData|Inverse Angle}}: Inverse the angle of the rotation. '' '''Example:''' change a rotation from -22.5 to 22.5 degrees.''
 
* {{PropertyData|Reverse Direction}}: Reverse orientation of Operation by 180 degrees.
 
* {{PropertyData|Reverse Direction}}: Reverse orientation of Operation by 180 degrees.
  
Line 108: Line 108:
  
 
''Descriptions for the settings are provided in the Properties list above.''
 
''Descriptions for the settings are provided in the Properties list above.''
 +
 
This section is simply a layout map of the settings in the window editor for the Operation.
 
This section is simply a layout map of the settings in the window editor for the Operation.
  
====Base Geometry====
+
===Base Geometry===
  
 
* '''Add''': adds selected element(s) which should be the base(s) for the path(s)
 
* '''Add''': adds selected element(s) which should be the base(s) for the path(s)
Line 116: Line 117:
 
* '''Clear''': clear all items in the Base Geometry list
 
* '''Clear''': clear all items in the Base Geometry list
  
====Base Location====
+
===Base Location===
  
 
* '''Add''': add an (X,Y) coordinate location to the current drilling operation.
 
* '''Add''': add an (X,Y) coordinate location to the current drilling operation.
Line 122: Line 123:
 
* '''Edit''': edit the selected location item
 
* '''Edit''': edit the selected location item
  
====Depth====
+
===Depths===
  
* {{PropertyData|Start Depth}}
+
* '''Start Depth''':
* {{PropertyData|Final Depth}}
+
* '''Final Depth''':
  
====Height====
+
===Heights===
  
* {{PropertyData|Safe Height}}
+
* '''Safe Height''':
* {{PropertyData|Clearance Height}}
+
* '''Clearance Height''':
  
====Operation====
+
===Operation===
  
* {{PropertyData|Tool Controller}}
+
* '''Tool Controller''':
* {{PropertyData|Retract Height}}
+
* '''Retract Height''':
* {{PropertyData|Peck}}
+
* '''Peck''':
* {{PropertyData|Peck Depth}}
+
* '''Peck Depth''':
* {{PropertyData|Dwell}}
+
* '''Dwell''':
* {{PropertyData|Dwell Time}}
+
* '''Dwell Time''':
* {{PropertyData|Use Tip Length}}
+
* '''Use Tip Length''':
  
 
==Scripting==
 
==Scripting==
{{Emphasis|See also:}} [[FreeCAD_Scripting_Basics|FreeCAD Scripting Basics]].
+
 
 +
<div class="mw-translate-fuzzy">
 +
==Программирование==
 +
{{Emphasis|Смотрите так же:}} [[FreeCAD_Scripting_Basics/ru|Основы составления скриптов в FreeCAD]].
 +
</div>
  
 
Example:
 
Example:
{{Code|code=#Place code example here.}}
+
 
 +
{{Code|code=
 +
#Place code example here.
 +
}}
 +
 
  
 
{{Docnav
 
{{Docnav
|[[Path_Pocket_Shape|Pocket]]
+
|[[Path_Pocket_Shape|Pocket Shape]]
|[[Path_Adaptive|Adaptive]]
+
|[[Path_MillFace|MillFace]]
 
|[[Path_Workbench|Path]]
 
|[[Path_Workbench|Path]]
|IconL=Path_Pocket.svg
+
|IconL=Path_Pocket_Shape.svg
|IconR=Path_Adaptive.svg
+
|IconR=Path_MillFace.svg
 
|IconC=Workbench_Path.svg
 
|IconC=Workbench_Path.svg
 
}}
 
}}
Line 159: Line 168:
 
{{Path_Tools_navi{{#translation:}}}}
 
{{Path_Tools_navi{{#translation:}}}}
 
{{Userdocnavi{{#translation:}}}}
 
{{Userdocnavi{{#translation:}}}}
{{clear}}
 

Latest revision as of 08:22, 1 June 2022

Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎română • ‎русский
Arrow-left.svg Previous: Path Pocket Shape.svg Pocket Shape
Next: MillFace Path MillFace.svg Arrow-right.svg

Path Drilling.svg Path Drilling

Системное название
Path Drilling
Расположение в меню
Path → Сверление
Верстаки
Path
Быстрые клавиши
P D
Представлено в версии
-
См. также
Нет

Описание

The Drilling command generates a drilling Operation in the Job.

Path Drilling Sample.png

Above: Path Drilling operation sample

Применение

  1. There are several ways to invoke the command:
    • Press the Path Drilling.svg Path Drilling button.
    • Select the Path → Path Drilling.svg Drilling option from the menu.
  2. In the Operation section:
    • Select a ToolController.
    • Select a Coolant Mode.
    • Optionally enable and adjust the following:
      • Peck set the Depth.
      • Dwell set the Time in seconds.
      • Extended Depth.
  3. In the Base Geometry section confirm that the list matches the holes that are intended for processing, and adjust add, enable, or disable, as necessary. Holes can be added by selecting the wall faces of the Holes.
  4. In the Depths section check, and if required adjust, the Start Depth and Final Depth.
  5. In the Heights section check, and if required adjust, the Safe Height and the Clearance Height.
  6. Press the OK button to generate the drilling path(s).

Примечания

  • When using edges for Base Geometry, always select the bottom edge of the hole.
  • Always verify the tool chosen is the correct diameter for the hole(s) selected.
  • Peck disabled generates (G81 canned drill cycles). Peck enabled generates (G83 canned drill cycles).
  • Dwell enabled is currently unsupported, but is intended to generate (G82 canned drill cycles).

Свойства

Note : Not all of these Properties are available in the Task Window Editor. Some are only accessible in the Data tab of the Properties View panel for this Operation.

Base

Note: It is suggested that you do not edit the Placement property of path operations. Rather, move or rotate the Path Job model as needed.

  • ДанныеPlacement: Overall placement[position and rotation] of the object - with respect to the origin (or origin of parent object container)
    • ДанныеAngle: Angle in degrees applied to rotation of the object around Axis property value
    • ДанныеAxis: Axis(one or multiple) around which to rotate the object, set in sub-properties: x, y, z
      • ДанныеX: x axis value
      • ДанныеY: y axis value
      • ДанныеZ: z axis value
    • ДанныеPosition: Position of the object, set in sub-properties: x, y, z - with respect to the origin (or origin of parent object container)
      • ДанныеX: x distance value
      • ДанныеY: y distance value
      • ДанныеZ: z distance value
  • ДанныеLabel: User-provided name of the object (UTF-8)
  • ДанныеDisabled: List of disabled features

Depth

  • ДанныеClearance Height: The height needed to clear clamps and obstructions
  • ДанныеFinal Depth: Final Depth of Tool- lowest value in Z
  • ДанныеSafe Height: The height above which Rapid motions are allowed. (Rapid safety height between locations)
  • ДанныеStart Depth: Starting depth of Tool - first cut depth in Z

Drill

  • ДанныеAdd Tip Length: Calculate the tip length and subtract from final depth
  • ДанныеDwell Enabled: Enable dwell
  • ДанныеDwell Time: The time to dwell between peck cycles
  • ДанныеPeck Depth: Incremental Drill depth before retracting to clear chips
  • ДанныеPeck Enabled: Enable pecking
  • ДанныеRetract Height: The height where feed starts and height during retract tool when path is finished
  • ДанныеReturn Level: Controls how tool retracts Default=G98

Path

  • ДанныеActive: make False, to prevent operation from generating code
  • ДанныеComment: An optional comment for this Operation
  • ДанныеUser Label: User assigned label
  • ДанныеTool Controller: Defines the Tool controller used in the Operation

Rotation (when available)

  • ДанныеAttempt Inverse Angle: Automatically attempt Inverse Angle if initial rotation is incorrect.
  • ДанныеB_Axis Error Override: Visually orient B(y) rotations to model (error in FreeCAD rendering).
  • ДанныеEnable Rotation: Enable rotation to gain access to holes not normal to Z axis.
  • ДанныеInverse Angle: Inverse the angle of the rotation. Example: change a rotation from -22.5 to 22.5 degrees.
  • ДанныеReverse Direction: Reverse orientation of Operation by 180 degrees.

Tasks Window Editor Layout

Descriptions for the settings are provided in the Properties list above.

This section is simply a layout map of the settings in the window editor for the Operation.

Base Geometry

  • Add: adds selected element(s) which should be the base(s) for the path(s)
  • Delete: delete the selected item(s) in the Base Geometry list
  • Clear: clear all items in the Base Geometry list

Base Location

  • Add: add an (X,Y) coordinate location to the current drilling operation.
  • Remove: remove the selected location item(s) from the Base Location list
  • Edit: edit the selected location item

Depths

  • Start Depth:
  • Final Depth:

Heights

  • Safe Height:
  • Clearance Height:

Operation

  • Tool Controller:
  • Retract Height:
  • Peck:
  • Peck Depth:
  • Dwell:
  • Dwell Time:
  • Use Tip Length:

Scripting

Программирование

Смотрите так же: Основы составления скриптов в FreeCAD.

Example:

#Place code example here.


Arrow-left.svg Previous: Path Pocket Shape.svg Pocket Shape
Next: MillFace Path MillFace.svg Arrow-right.svg