CAM Rampe d'entrée

From FreeCAD Documentation
Revision as of 12:02, 5 November 2018 by Luc (talk | contribs) (Created page with " # Sélectionner un objet de contour ou de chemin de profil Path # cliquez sur l'élément de menu 16px Path DressupRampEntry|R...")

Rampe d'entrée

Emplacement du menu
Path → Path Dressup → RampEntry Dress-up
Ateliers
Path
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
Path_DressupTag, Path_DressupDogbone , Path_DressupDragKnife

Description

Cet outil habille un parcours existant pour ajouter une rampe d'entrée dans l'usinage

Utilisation

# Sélectionner un objet de contour ou de chemin de profil Path
  1. cliquez sur l'élément de menu RampEntry Dress-up

Properties

  • Ramp Feed Rate can either be the current vertical or horizontal feed rate or some other custom value
  • Angle of the ramp against the vertical axis. A smaller value makes the ramp steeper.
  • Method is used to select different modes of ramping:
    • RampMethod1 goes down at the ramp angle and the moves horizontal to the target point
    • RampMethod2 goes horizontal first and then down at the ramp angle to the target point
    • RampMethod3 goes down in a zigzag way
    • Helix goes down spiraling
  • Dressup Start Depth is the distance above the target level where ramping starts
  • UseStartDepth indicates that the ramping does not start above the stock level. If it is not set to true the first ramp can be steeper than expected.