CAM Rampe d'entrée
|
|
| Emplacement du menu |
|---|
| Path → Path Dressup → RampEntry Dress-up |
| Ateliers |
| Path |
| Raccourci par défaut |
| Aucun |
| Introduit dans la version |
| - |
| Voir aussi |
| Path_DressupTag, Path_DressupDogbone , Path_DressupDragKnife |
Description
Cet outil habille un parcours existant pour ajouter une rampe d'entrée dans l'usinage
Usage
- Select a contour or profile path Path objects
- click the
RampEntry Dress-up menu item
Properties
- Ramp Feed Rate can either be the current vertical or horizontal feed rate or some other custom value
- Angle of the ramp against the vertical axis. A smaller value makes the ramp steeper.
- Method is used to select different modes of ramping:
- RampMethod1 goes down at the ramp angle and the moves horizontal to the target point
- RampMethod2 goes horizontal first and then down at the ramp angle to the target point
- RampMethod3 goes down in a zigzag way
- Helix goes down spiraling
- Dressup Start Depth is the distance above the target level where ramping starts
- UseStartDepth indicates that the ramping does not start above the stock level. If it is not set to true the first ramp can be steeper than expected.