CAM DressupRampEntry: Difference between revisions

From FreeCAD Documentation
No edit summary
(png -> svg)
Line 6: Line 6:
|[[Path_DressupTag|Tag Dressup]]
|[[Path_DressupTag|Tag Dressup]]
|[[Path_Workbench|Path]]
|[[Path_Workbench|Path]]
|IconL=Path_DressupLeadInOut.png
|IconL=Path_DressupLeadInOut.svg
|IconR=Path_DressupTag.png
|IconR=Path_DressupTag.svg
|IconC=Workbench_Path.svg
|IconC=Workbench_Path.svg
}}
}}
Line 49: Line 49:
|[[Path_DressupTag|Tag Dressup]]
|[[Path_DressupTag|Tag Dressup]]
|[[Path_Workbench|Path]]
|[[Path_Workbench|Path]]
|IconL=Path_DressupLeadInOut.png
|IconL=Path_DressupLeadInOut.svg
|IconR=Path_DressupTag.png
|IconR=Path_DressupTag.svg
|IconC=Workbench_Path.svg
|IconC=Workbench_Path.svg
}}
}}

Revision as of 19:27, 3 December 2020

Path DressupTag

Menu location
Path → Path Dressup → RampEntry Dress-up
Workbenches
Path
Default shortcut
None
Introduced in version
-
See also
Path DressupTag, Path DressupDogbone, Path DressupDragKnife

Description

This tool dresses up an existing path to add a ramp entry

Usage

  1. Select a contour or profile path Path objects
  2. click the RampEntry Dress-up menu item

Properties

  • Ramp Feed Rate can either be the current vertical or horizontal feed rate or some other custom value
  • Angle of the ramp against the vertical axis. A smaller value makes the ramp steeper.
  • Method is used to select different modes of ramping:
    • RampMethod1 goes down at the ramp angle and the moves horizontal to the target point
    • RampMethod2 goes horizontal first and then down at the ramp angle to the target point
    • RampMethod3 goes down in a zigzag way
    • Helix goes down spiraling
  • Dressup Start Depth is the distance above the target level where ramping starts
  • UseStartDepth indicates that the ramping does not start above the stock level. If it is not set to true the first ramp can be steeper than expected.