Path: Îmbrăcarea Traiectoriei corectarea colțurilor

From FreeCAD Documentation
Revision as of 11:38, 5 November 2018 by Luc (talk | contribs) (Created page with "Path: DressupDogbone")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Path DressupTag

Menu location
Path → Path Dressup → Dogbone Dress-up
Workbenches
Path
Default shortcut
None
Introduced in version
-
See also
Path_DressupTag, Path_DressupRampEntry, Path_DressupDragKnife

Description

This tool dresses up an existing path to overcut corners on inside angles of a profile or contour operation. A cylindrical cutter cannot cut all the way into an acute corner without colliding with the model. In certain cases, it may be preferable to violate the model and ensure that the material at the corner is removed. This is especially necessary if parts are going to intersect/interlock with each other.

Usage

  1. Select a contour or profile path Path objects
  2. click the Dogbone Dress-up menu item

Options

  • Side - Which side of the path the modification will be added to.
  • Style - Style of overcut (Dogbone, T-Bone Horizontal, T-Bone Vertical, T-Bone Long Edge, T-Bone Short Edge).
  • incision - The Algorithm to use calculating the overcut length
  • Custom- If Incision is custom, the custom property is used to set the length.

Limitations

The dogbone dressup needs a straight path segement (G1) before and after the corner where the dressup should be inserted.