CAM Personnaliser
Path Custom |
Emplacement du menu |
---|
Path → Partial Commands → Custom |
Ateliers |
Path |
Raccourci par défaut |
Aucun |
Introduit dans la version |
- |
Voir aussi |
Aucun |
Description
Cet outil insert un objet chemin qui est construit à partir d'un G-Code adapté.
Because the Custom G-Code command provides no link to a Tool Controller, if a Tool is used by the custom G-Code, the Tool index must be written, along with the Spindle Start M-Code, in order that it is passed to the Postprocessor. This ensures that Tool changes and starts will be properly generated.
For example, to convey to the Postprocessor that the Tool used in the Custom G-Code operation has Tool index 6, and a Spindle Speed of 10,000, insert the following code at the beginning of the Custom G-Code Operation:
(T6: 4mm Endmill)
M6 T6
M3 S10000
Note that Feed rates will be correctly generated by the Postprocessor, only if the Custom G-Code Feed rates are written in Units/second.
Utilisation
- Pressez le bouton Custom
- Écrivez le G-Code adapté dans la propriété G Code de l'objet nouvellement créé. Voyez la page Path scripting pour les commandes G-Code acceptées.
Propriétés
- DonnéesG Code: Les commandes G-Code sur lequelles sont construites le chemin.