刀路輪廓

From FreeCAD Documentation
Revision as of 05:59, 11 May 2019 by Renoxray (talk | contribs) (Created page with "====基础几何体==== *添加,如果尚未完成,该元素应是刀路的基础。 **你可以删除或者改变其他元素。")
Jump to navigation Jump to search
Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎română • ‎中文

Path Contour.svg Path Contour

Menu location
Path → Contour
Workbenches
Path
Default shortcut
None
Introduced in version
-
See also


描述

輪廓工具創建一個簡單的,由基於複雜3D零件-對象切割出的外部輪廓線。整個作業模型在輪廓命令被調用時為刀具運行提供輸入,無論實體幾何體是否被選中。起始點可以從刀具運行編輯器中選擇,使用一個在屬性預覽->起始點定義的位置。

刀路輪廓對象將成為刀路作業的一部分。

PathContourToolExample.png

使用

  1. 按下Path Contour.png Path 輪廓線按鈕。
  2. 調整所需的屬性


屬性

基礎幾何體

  • 添加,如果尚未完成,該元素應是刀路的基礎。
    • 你可以刪除或者改變其他元素。

Depth

  • DataStart Depth: Starting Depth of Tool- starting depth in Z
  • DataFinal Depth: Final Depth of Tool- lowest cutting level in Z
  • DataStep Down: Step Down of Tool- the amount of material which will be removed at once

Height

  • DataSafe Height: The hight above the workpeace where rapid motions are allowed.
  • DataClearance Height: The height needed to clear clamps and obstructions

Operation

  • DataTool Controller: Defines the Tool controller used in the Operation
  • DataCut Side: Defines on which side the cut should be done
  • DataDirection: Specifies a CW or CCW move for the cut
  • DataExtra Offset: Addet to the tool diameter to leave some material for a finish path
  • DataUse Start Point: Set the start point of the path manualy (not implemented jet)
  • DataUse Compensation: Creates a path with offset of the tool radius to respect the parts dimensions