Part Wedge/de: Difference between revisions

From FreeCAD Documentation
(Created page with "Erstellt eine parametrisches Keil-Objekt. Der Keil hat standardmäßig eine große quadratische Grundfläche und eine kleinere quadratische Deckfläche.")
(Created page with "=== Start-Größe und Position ===")
Line 3: Line 3:
Erstellt eine parametrisches Keil-Objekt. Der Keil hat standardmäßig eine große quadratische Grundfläche und eine kleinere quadratische Deckfläche.
Erstellt eine parametrisches Keil-Objekt. Der Keil hat standardmäßig eine große quadratische Grundfläche und eine kleinere quadratische Deckfläche.


=== Default Size and Placement ===
=== Start-Größe und Position ===


'''Placement:'''
'''Placement:'''

Revision as of 09:26, 21 March 2017

Part Wedge

Menüeintrag
Part -> Part CreatePrimitives -> Wedge
Arbeitsbereich
Part
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Part CreatePrimitives

Erstellt eine parametrisches Keil-Objekt. Der Keil hat standardmäßig eine große quadratische Grundfläche und eine kleinere quadratische Deckfläche.

Start-Größe und Position

Placement: The default orientation places the base in the XZ plane and the top outward in the Y axis direction. The default base corner is the 0,0,0 origin.

Base Face:

  • X : 10 mm
  • Z : 10 mm

Height:

  • Y : 0-10 mm

Top Face:

  • X : 2-8 mm
  • Z : 2-8 mm


Parametric Inputs

Using the default placement, the below inputs are:

  • DatenX min/max : Base face X axis span
  • DatenY min/max: Wedge height span
  • DatenZ min/max : Base face Z axis span
  • DatenX2 min/max : Top face X axis span
  • DatenZ2 min/max : Top face Z axis span