Part Torus/ru: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 9: Line 9:


In the [[Part_Workbench|Part]] workbench click on the torus icon [[Image:Part Torus.png|32px]]. The torus will be positioned at origin (point 0,0,0) on creation.
In the [[Part_Workbench|Part]] workbench click on the torus icon [[Image:Part Torus.png|32px]]. The torus will be positioned at origin (point 0,0,0) on creation.
The angle parameters (angle1, angle2, angle3), as well as the radius parameter ( radius1 , radius2) parameters permit to parametrize the torus. The angle parameters permit to make a portion of torus instead of a full one (they are set to 360° by default), the radius 1 and 2 define respectively the size of the hole and the ring thickness of the torus.
The angle parameters (angle1, angle2, angle3), as well as the radius parameter ( radius1 , radius2) parameters permit to parametrize the torus, see next paragraph.


== Option ==
== Option ==

[[File:TorusExampleOverviewParameters.jpg]]

'''Parameter'''

A torus can be assimilated to a small disc that makes a circular orbit around an imaginary axe. Thus the parametric torus is defined by the following parameters:

* {{Parameter|Radius 1:}} Radius of the circle around which the disc circulate
* {{Parameter|Radius 2:}} Radius of the disc defining the form of the torus
* {{Parameter|Angle 1:}} 1nd angle to cut / define the disc of the torus
* {{Parameter|Angle 2:}} 2nd angle to cut / define the disc of the torus
* {{Parameter|Angle 3:}} 3rd angle to define the circumference of the torus.

as well as the standard set of placement parameters. The pictures below give a visual overview of the parameters antecedently mentioned:

[[File:TorusExampleRadius1.jpg]]
The parameter radius 1 has a value of 20 mm.

[[File:TorusExampleRadius2.jpg]]
The parameter radius 2 has a value of 2 mm.

[[File:TorusExampleAngle1.jpg]]
The parameter angle 1 has a value of -90°. Notice that, the "angle measure" tool cannot display negative angle. Considered the displayed value in picture as "-90°".

[[File:TorusExampleAngle2.jpg]]
The parameter angle 2 has a value of 90°.

[[File:TorusExampleAngle3.jpg]]
The parameter angle 3 has a value of 90°.


== Property ==


== Scripting ==


{{clear}}
{{clear}}

Revision as of 21:18, 20 April 2015

Part Torus

Системное название
Part Torus
Расположение в меню
Part → Torus
Верстаки
Part, Complete
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Part CreatePrimitives

Description

Creates a simple parametric torus, with position, angle1, angle2, angle3, radius1 and radius2 as parameters.

How to use

In the Part workbench click on the torus icon . The torus will be positioned at origin (point 0,0,0) on creation. The angle parameters (angle1, angle2, angle3), as well as the radius parameter ( radius1 , radius2) parameters permit to parametrize the torus, see next paragraph.

Option

Parameter

A torus can be assimilated to a small disc that makes a circular orbit around an imaginary axe. Thus the parametric torus is defined by the following parameters:

  • Radius 1: Radius of the circle around which the disc circulate
  • Radius 2: Radius of the disc defining the form of the torus
  • Angle 1: 1nd angle to cut / define the disc of the torus
  • Angle 2: 2nd angle to cut / define the disc of the torus
  • Angle 3: 3rd angle to define the circumference of the torus.

as well as the standard set of placement parameters. The pictures below give a visual overview of the parameters antecedently mentioned:

The parameter radius 1 has a value of 20 mm.

The parameter radius 2 has a value of 2 mm.

The parameter angle 1 has a value of -90°. Notice that, the "angle measure" tool cannot display negative angle. Considered the displayed value in picture as "-90°".

The parameter angle 2 has a value of 90°.

The parameter angle 3 has a value of 90°.