Part Torus

Cone

Tube

Part

Part Torus
Menu location
Part → Primitives → Torus
Workbenches
Part
Default shortcut
None
Introduced in version
-
See also
Part Primitives

Description

The Part Torus command creates a parametric torus solid, a doughnut shape. It is the result of sweeping a circular profile around a circular path. In the coordinate system defined by its DataPlacement property, the circular path of the torus lies on the XY plane with its center at the origin.

A Part Torus can be turned into a segment of a torus by changing its DataAngle3 property. By changing its DataAngle1 and/or DataAngle2 properties the swept profile can become a segment of a circle.

Usage

1. There are several ways to invoke the command:
   • Press the Part Torus button.
   • Select the Part → Primitives → Torus option from the menu.
2. The torus is created.
3. Optionally change the dimensions and DataPlacement of the torus by doing one of the following:
   • Double-click the object in the Tree view:
     1. The Geometric Primitives task panel opens.
     2. Change one or more properties.
     3. The object is dynamically updated in the 3D view.
     4. Press the OK button.
   • Change the properties in the Property editor.
   • Change the DataPlacement with the Std TransformManip command.

Example

Part Torus from the scripting example

A Part Torus object created with the scripting example below is shown here.

Notes

• A Part Torus can also be created with the Part Primitives command. With that command you can specify the dimensions and placement at creation time.

Properties

See also: Property editor.

A Part Torus object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:

Data

Attachment

The object has the same attachment properties as a Part Part2DObject.

Torus

• DataRadius1 (Length): The radius of the circular path of the torus. The default is 10mm.
• DataRadius2 (Length): The radius of the circular profile of the torus. The default is 2mm.
• DataAngle1 (Angle): The start angle of the circular profile. Valid range: -180° <= value <= 180°. The default is -180°.
• DataAngle2 (Angle): The end angle the circular profile. Valid range: -180° <= value <= 180°. The default is 180°. If the total angle of the circular profile is smaller than 360° the profile will have a pie-shape.
• DataAngle3 (Angle): The angle of the circular path of the torus. Valid range: 0° < value <= 360°. The default is 360°. If it is smaller than 360° the resulting solid will be a segment of a torus.

Scripting

See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.

A Part Torus can be created with the addObject() method of the document:

torus = FreeCAD.ActiveDocument.addObject("Part::Torus", "myTorus")

• Where "myTorus" is the name for the object.
• The function returns the newly created object.

Example:

import FreeCAD as App

doc = App.activeDocument()

torus = doc.addObject("Part::Torus", "myTorus")
torus.Radius1 = 20
torus.Radius2 = 10
torus.Angle1 = -90
torus.Angle2 = 45
torus.Angle3 = 270
torus.Placement = App.Placement(App.Vector(1, 2, 3), App.Rotation(30, 45, 10))

doc.recompute()

Cone

Tube

Part

Part

• Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder

---

• Creation and modification: Extrude, Revolve, Mirror, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment

---

• Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR

---

• Measure: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta

---

• Other tools: Import, Export, Box selection, Shape from Mesh, Points from mesh, Convert to solid, Reverse shapes, Create simple copy, Create transformed copy, Create shape element copy, Refine shape, Check geometry, Defeaturing, Appearance, Color per face

User documentation

• Getting started
• Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
• Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate

---

• Help: Tutorials, Video tutorials
• Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web

---

• Addons: Addon Manager, External workbenches, Scripting and macros

---

• Hubs: User hub, Power users hub, Developer hub