Part Torus/de: Difference between revisions

From FreeCAD Documentation
(Created page with "== Erstellen ==")
No edit summary
Line 8: Line 8:
== Erstellen ==
== Erstellen ==


== Erstellen ==
Im Arbeitsbereich Körper (workbench Part) auf das Symbol [[Image:Part_Torus.png|32px]] klicken. Zunächst entsteht ein vollständiger Torus mit mit mittlerem Ring-Radius 10 mm, und Querschnitt-Radius 2mm.
Im Arbeitsbereich Körper (workbench Part) auf das Symbol [[Image:Part_Torus.png|32px]] klicken. Zunächst entsteht ein vollständiger Torus mit mit mittlerem Ring-Radius 10 mm, und Querschnitt-Radius 2mm.



Revision as of 15:32, 15 January 2018

Part Torus

Menüeintrag
Part → Torus
Arbeitsbereich
Part, Complete
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Part CreatePrimitives

Zusammenfassung

Erstellt wird ein parametrisierter Torus: Parameter sind der mittlere Ring- Radius dieses "Schwimmringes" und der Radius seines Querschnitts.

Erstellen

Im Arbeitsbereich Körper (workbench Part) auf das Symbol klicken. Zunächst entsteht ein vollständiger Torus mit mit mittlerem Ring-Radius 10 mm, und Querschnitt-Radius 2mm.

Option

Parameter

A torus can be assimilated to a small disc that makes a circular orbit around an imaginary axe. Thus the parametric torus is defined by the following parameters:

  • Radius1: Radius of the circle around which the disc circulate
  • Radius2: Radius of the disc defining the form of the torus
  • Angle1: 1st angle to cut / define the disc of the torus
  • Angle2: 2nd angle to cut / define the disc of the torus
  • Angle3: 3rd angle to define the circumference of the torus.

as well as the standard set of placement parameters. The pictures below give a visual overview of the parameters antecedently mentioned:

The parameter Radius1 has a value of 20 mm.

The parameter Radius2 has a value of 2 mm.

The parameter Angle1 has a value of -90°. Notice that, the "angle measure" tool cannot display negative angle. Considered the displayed value in picture as "-90°".

The parameter Angle2 has a value of 90°.

The parameter Angle3 has a value of 90°.