Part "Полость"

From FreeCAD Documentation
Revision as of 17:03, 22 January 2021 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Part Thickness

Системное название
Part Thickness
Расположение в меню
Деталь → Толщина
Верстаки
Part
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Смещение

Определение

Инструмент Толщина обрабатывает твёрдые тела и трансформирует их в пустые объекты, давая каждой из их граней заданную толщину. В некоторых случаях это сильно ускоряет работу и позволяет избежать выдавливания и создания карманов.

Usage

  1. Create a solid
  2. Select one or more faces
  3. Click on the Part Thickness tool
  4. Set the parameters (see Options)
  5. Click OK to confirm, create the operation and exit the function
  6. In the Properties table adjust the parameters if necessary

Options

  • Thickness: Wall thickness of the resulting object, set the desired value
    • A positive value will offset the faces outward
    • A negative value will offset the faces inward
  • Mode
    • Skin: Select this option if you want to get an item like a vase, headless but with the bottom
    • Pipe: Select this option if you want to get an object like a pipe, headless and bottomless. In this case it may be convenient to select the faces to be deleted before you start the tool. Helping with predefined views buttons or use the numeric keys.
    • RectoVerso:
  • Join Type
    • Arc: removes the outer edges and create a fillet with a radius equal to the thickness defined
    • Tangent:
    • Intersection:
  • Intersection:
  • Self-intersection: Enables self-intersection
  • Face / Done: Select the faces to be removed, then click Done
  • Update view: Automatically updates the view in real time

Limitations

Complex shapes may produce bizarre, hard to predict results. Carefully inspect the resulting shape and save your work before applying the operation.

Links

A good example on how to use this tool on the forum: Re: Help designing a simple enclosure

Examples

Hollow cylinder

  1. Create Cylinder with radius 10mm and height 20mm
  2. Select the top and bottom surface of the cylinder
  3. Click on the Thickness button (no need to change default settings) and press OK

Notes:

Box-Enclosure