Сфера

The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

This page is a translated version of the page Part Sphere and the translation is 22% complete.

Outdated translations are marked like this.

Other languages:

Цилиндр

Конус

Верстак Part

Системное название
Сфера
Part_Sphere
Расположение в меню
Деталь → Примитивы → Сфера
Верстаки
Part(Деталь)
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Создать примитивы

Описание

Создаёт простую параметрическую сферу с параметрами положение (position), угол1(angle1), угол2(angle2), угол3(angle3) и радиус(radius).

A Part Sphere can be truncated at the top and/or bottom by changing its ДанныеAngle1 and/or ДанныеAngle2 properties. It can be turned into a segment of a sphere by changing its ДанныеAngle3 property.

Применение

Переключитесь на верстак Part
Существует несколько способов вызова команды:
- Нажмите на иконку сферы Сфера на панели инструментов.
- Выберите из меню Деталь → Примитивы → Сфера.

Example

A Part Sphere object created with the scripting example below is shown here.

Notes

A Part Sphere can also be created with the Part Primitives command. With that command you can specify the dimensions and placement at creation time.

Свойства

Данные

Attachment

The object has the same attachment properties as a Part Part2DObject.

Sphere

ДанныеRadius (Length): The radius of the sphere. The default is 5mm.
ДанныеAngle1 (Angle): The start angle of the circular arc profile of the sphere. Valid range: -90° <= value <= 90°. May not be equal to ДанныеAngle2. The default is -90°.
ДанныеAngle2 (Angle): The end angle of the circular arc profile of the sphere. Valid range: -90° <= value <= 90°. May not be equal to ДанныеAngle1. The default is 90°. If the total angle of the arc profile is smaller than 180° the sphere will be truncated and have a flat face at the top and/or bottom.
ДанныеAngle3 (Angle): The total angle of revolution of the sphere. Valid range: 0° < value <= 360°. The default is 360°. If it is smaller than 360° the resulting solid will be a segment of a sphere.

Scripting

A Part Sphere can be created with the addObject() method of the document:

sphere = FreeCAD.ActiveDocument.addObject("Part::Sphere", "mySphere")

Where "mySphere" is the name for the object.
The function returns the newly created object.

Example:

import FreeCAD as App

doc = App.activeDocument()

sphere = doc.addObject("Part::Sphere", "mySphere")
sphere.Radius = 20
sphere.Angle1 = -30
sphere.Angle2 = 45
sphere.Angle3 = 90
sphere.Placement = App.Placement(App.Vector(3, 9, 11), App.Rotation(75, 60, 30))

doc.recompute()