Part Sphere

Cylinder

Cone

Part

Part Sphere
Ubicación en el Menú
Part -> Sphere
Entornos de trabajo
Part Module,Complete
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
Part CreatePrimitives

Description

Crea una esfera paramétrica simple, con los parámetros de posición, ángulo1, ángulo2, ángulo3 y radio. La esfera se situará en el origen (point 0,0,0). Los parámetros de ángulo permiten crear una porción de la esfera en lugar de la esfera completa (por defecto están establecidos a 360°)

A Part Sphere can be truncated at the top and/or bottom by changing its DatosAngle1 and/or DatosAngle2 properties. It can be turned into a segment of a sphere by changing its DatosAngle3 property.

Usage

1. There are several ways to invoke the command:
   • Press the Part Sphere button.
   • Select the Part → Primitives → Sphere option from the menu.
2. The sphere is created.
3. Optionally change the dimensions and DatosPlacement of the sphere by doing one of the following:
   • Double-click the object in the Tree view:
     1. The Geometric Primitives task panel opens.
     2. Change one or more properties.
     3. The object is dynamically updated in the 3D view.
     4. Press the OK button.
   • Change the properties in the Property editor.
   • Change the DatosPlacement with the Std TransformManip command.

Example

Part Sphere from the scripting example

A Part Sphere object created with the scripting example below is shown here.

Notes

• A Part Sphere can also be created with the Part Primitives command. With that command you can specify the dimensions and placement at creation time.

Properties

See also: Property editor.

A Part Sphere object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:

Data

Attachment

The object has the same attachment properties as a Part Part2DObject.

Sphere

• DatosRadius (Length): The radius of the sphere. The default is 5mm.
• DatosAngle1 (Angle): The start angle of the circular arc profile of the sphere. Valid range: -90° <= value <= 90°. May not be equal to DatosAngle2. The default is -90°.
• DatosAngle2 (Angle): The end angle of the circular arc profile of the sphere. Valid range: -90° <= value <= 90°. May not be equal to DatosAngle1. The default is 90°. If the total angle of the arc profile is smaller than 180° the sphere will be truncated and have a flat face at the top and/or bottom.
• DatosAngle3 (Angle): The total angle of revolution of the sphere. Valid range: 0° < value <= 360°. The default is 360°. If it is smaller than 360° the resulting solid will be a segment of a sphere.

Scripting

See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.

A Part Sphere can be created with the addObject() method of the document:

sphere = FreeCAD.ActiveDocument.addObject("Part::Sphere", "mySphere")

• Where "mySphere" is the name for the object.
• The function returns the newly created object.

Example:

import FreeCAD as App

doc = App.activeDocument()

sphere = doc.addObject("Part::Sphere", "mySphere")
sphere.Radius = 20
sphere.Angle1 = -30
sphere.Angle2 = 45
sphere.Angle3 = 90
sphere.Placement = App.Placement(App.Vector(3, 9, 11), App.Rotation(75, 60, 30))

doc.recompute()

Cylinder

Cone

Part

Part

• Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder

---

• Creation and modification: Extrude, Revolve, Mirror, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment

---

• Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR

---

• Measure: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta

---

• Other tools: Import, Export, Box selection, Shape from Mesh, Points from mesh, Convert to solid, Reverse shapes, Create simple copy, Create transformed copy, Create shape element copy, Refine shape, Check geometry, Defeaturing, Appearance, Color per face

User documentation

• Getting started
• Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
• Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate

---

• Help: Tutorials, Video tutorials
• Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web

---

• Addons: Addon Manager, External workbenches, Scripting and macros

---

• Hubs: User hub, Power users hub, Developer hub