Part Sphere/es: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 22: Line 22:
# Switch to the [[Image:Workbench_Part.svg|16px]] [[Part_Workbench|Part Workbench]]
# Switch to the [[Image:Workbench_Part.svg|16px]] [[Part_Workbench|Part Workbench]]
# There are several ways to invoke the command:
# There are several ways to invoke the command:
#* Press the {{Button|[[Image:Part_Sphere.svg|16px]]}} button in the toolbar.
#* Press the {{Button|[[Image:Part_Sphere.svg|16px]] Sphere}} button in the toolbar.
#* Select the {{MenuCommand|Part → Primitives → [[Image:Part_Sphere.svg|16px]] Sphere}} from the menu bar.
#* Select the {{MenuCommand|Part → Primitives → [[Image:Part_Sphere.svg|16px]] Sphere}} from the menu bar.



'''Result:''' The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).
'''Result:''' The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).


The sphere properties can later be edited, either in the property editor or by double-clicking on the sphere in the model tree.
== Options ==

The parametric sphere is defined by the following parameters:


== Properties==
* Radius
* Angle 1
* Angle 2
* Angle 3
* as well as the standard set of placement parameters


The picture below gives an overview of a parametric sphere with parameters different from the default value.
The picture below gives an overview of a parametric sphere with parameters different from the default value.
Line 42: Line 35:
[[File:PartDesign_Sphere_Parameter_en.jpg|600px]]
[[File:PartDesign_Sphere_Parameter_en.jpg|600px]]


====Parameter====
* {{PropertyData|Radius:}} Radius of the sphere
* {{PropertyData|Radius:}} Radius of the sphere
* {{PropertyData|Angle 1:}} 1nd angle to cut / define the sphere
* {{PropertyData|Angle 1:}} 1nd angle to cut / define the sphere

Revision as of 15:35, 4 May 2021

Other languages:

Part Sphere

Ubicación en el Menú
Part -> Sphere
Entornos de trabajo
Part Module,Complete
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
Part CreatePrimitives

Crea una esfera paramétrica simple, con los parámetros de posición, ángulo1, ángulo2, ángulo3 y radio. La esfera se situará en el origen (point 0,0,0). Los parámetros de ángulo permiten crear una porción de la esfera en lugar de la esfera completa (por defecto están establecidos a 360°)

Usage

  1. Switch to the Part Workbench
  2. There are several ways to invoke the command:
    • Press the Sphere button in the toolbar.
    • Select the Part → Primitives → Sphere from the menu bar.

Result: The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).

The sphere properties can later be edited, either in the property editor or by double-clicking on the sphere in the model tree.

Properties

The picture below gives an overview of a parametric sphere with parameters different from the default value.

  • DatosRadius: Radius of the sphere
  • DatosAngle 1: 1nd angle to cut / define the sphere
  • DatosAngle 2: 2nd angle to cut / define the sphere
  • DatosAngle 3: 3rd angle to cut / define the sphere

Because it is quite difficult to explain the meaning of the parameters angle 1, angle 2, angle 3, the picture below gives an explanation about these parameters with following values: angle 1 = -45°, angle 2 = 45° and angle 3= 90°.


Part
User documentation
Retrieved from "http://wiki.freecad.org/index.php?title=Part_Sphere/es&oldid=883751"