Part Sphere/es: Difference between revisions

From FreeCAD Documentation
No edit summary
(Updating to match new version of source page)
Line 7: Line 7:
In the workbench [[Part_Workbench|Part]] click on the sphere icon [[Image:Part Sphere.png|32px]]. The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).
In the workbench [[Part_Workbench|Part]] click on the sphere icon [[Image:Part Sphere.png|32px]]. The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).


== Options ==
== Options ==

The parametric sphere is defined by the following parameters:

* Radius
* Angle 1
* Angle 2
* Angle 3
* as well as the standard set of placement parameters

The picture below gives an overview of a parametric sphere with parameters different from the default value.

[[File:PartDesign_Sphere_Parameter_en.jpg|600px]]

====Parameter====
* {{Parameter|Radius:}} Radius of the sphere
* {{Parameter|Angle 1:}} Angle defined between the y-axis (green arrow) and an imaginary rotating line around the x-axis (red arrow). One end of the line is fixed on the origin. The other end of the line may rotate as said around the x-axis and remain in the XY-plane. The line has the length of the radius of the sphere.
* {{Parameter|Angle 2:}} Test


{{clear}}
{{clear}}

Revision as of 17:41, 23 November 2014

Part Sphere

Ubicación en el Menú
Part -> Sphere
Entornos de trabajo
Part Module,Complete
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
Part CreatePrimitives

Description

Creates a simple parametric sphere, with position, angle1, angle2, angle3 and radius parameters.

How to use

In the workbench Part click on the sphere icon . The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).

Options

The parametric sphere is defined by the following parameters:

  • Radius
  • Angle 1
  • Angle 2
  • Angle 3
  • as well as the standard set of placement parameters

The picture below gives an overview of a parametric sphere with parameters different from the default value.

Parameter

  • Radius: Radius of the sphere
  • Angle 1: Angle defined between the y-axis (green arrow) and an imaginary rotating line around the x-axis (red arrow). One end of the line is fixed on the origin. The other end of the line may rotate as said around the x-axis and remain in the XY-plane. The line has the length of the radius of the sphere.
  • Angle 2: Test