Part Sphere: Difference between revisions

From FreeCAD Documentation
(Marked this version for translation)
(remove double info and update wording)
(One intermediate revision by the same user not shown)
Line 31: Line 31:
#* Press the {{Button|[[Image:Part_Sphere.svg|16px]]}} button in the toolbar.
#* Press the {{Button|[[Image:Part_Sphere.svg|16px]]}} button in the toolbar.
#* Select the {{MenuCommand|Part → Primitives → [[Image:Part_Sphere.svg|16px]] Sphere}} from the menu bar.
#* Select the {{MenuCommand|Part → Primitives → [[Image:Part_Sphere.svg|16px]] Sphere}} from the menu bar.



<!--T:31-->
<!--T:31-->
'''Result:''' The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).
'''Result:''' The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).


The sphere properties can later be edited, either in the property editor or by double-clicking on the sphere in the model tree.
== Options == <!--T:4-->

<!--T:18-->
The parametric sphere is defined by the following parameters:


<!--T:19-->
== Properties== <!--T:4-->
* Radius
* Angle 1
* Angle 2
* Angle 3
* as well as the standard set of placement parameters


<!--T:20-->
<!--T:20-->
Line 54: Line 45:
[[File:PartDesign_Sphere_Parameter_en.jpg|600px]]
[[File:PartDesign_Sphere_Parameter_en.jpg|600px]]


====Parameter==== <!--T:17-->
* {{PropertyData|Radius:}} Radius of the sphere
* {{PropertyData|Radius:}} Radius of the sphere
* {{PropertyData|Angle 1:}} 1nd angle to cut / define the sphere
* {{PropertyData|Angle 1:}} 1nd angle to cut / define the sphere

Revision as of 00:29, 6 April 2021

Part Sphere

Menu location
Part → Primitives → Sphere
Workbenches
Part Module
Default shortcut
None
Introduced in version
-
See also
Part Primitives

Description

Creates a simple parametric sphere, with position, angle1, angle2, angle3 and radius parameters.

Usage

  1. Switch to the Part Workbench
  2. There are several ways to invoke the command:
    • Press the button in the toolbar.
    • Select the Part → Primitives → Sphere from the menu bar.

Result: The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).

The sphere properties can later be edited, either in the property editor or by double-clicking on the sphere in the model tree.

Properties

The picture below gives an overview of a parametric sphere with parameters different from the default value.

  • DataRadius: Radius of the sphere
  • DataAngle 1: 1nd angle to cut / define the sphere
  • DataAngle 2: 2nd angle to cut / define the sphere
  • DataAngle 3: 3rd angle to cut / define the sphere

Because it is quite difficult to explain the meaning of the parameters angle 1, angle 2, angle 3, the picture below gives an explanation about these parameters with following values: angle 1 = -45°, angle 2 = 45° and angle 3= 90°.