Part Sphere: Difference between revisions
FreeMaxCar (talk | contribs) No edit summary |
FreeMaxCar (talk | contribs) No edit summary |
||
Line 25: | Line 25: | ||
====Parameter==== <!--T:17--> |
====Parameter==== <!--T:17--> |
||
* {{Parameter|Radius:}} Radius of the sphere |
* {{Parameter|Radius:}} Radius of the sphere |
||
* {{Parameter|Angle 1:}} Angle defined between the |
* {{Parameter|Angle 1:}} Angle defined between the y-axis (green arrow) and an imaginary rotating line around the x-axis (red arrow). One end of the line is fixed on the origin. The other end of the line may rotate as said around the x-axis and remain in the XY-plane. The line has the length of the radius of the sphere. |
||
* {{Parameter|Angle 2:}} Test |
* {{Parameter|Angle 2:}} Test |
||
Revision as of 07:39, 8 November 2014
Part Sphere |
Menu location |
---|
Part -> Sphere |
Workbenches |
Part Module,Complete |
Default shortcut |
None |
Introduced in version |
- |
See also |
Part CreatePrimitives |
Description
Creates a simple parametric sphere, with position, angle1, angle2, angle3 and radius parameters.
How to use
In the workbench Part click on the sphere icon . The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).
Options
The parametric sphere is defined by the following parameters:
- Radius
- Angle 1
- Angle 2
- Angle 3
- as well as the standard set of placement parameters
The picture below gives an overview of a parametric sphere with parameters different from the default value.
Parameter
- Radius: Radius of the sphere
- Angle 1: Angle defined between the y-axis (green arrow) and an imaginary rotating line around the x-axis (red arrow). One end of the line is fixed on the origin. The other end of the line may rotate as said around the x-axis and remain in the XY-plane. The line has the length of the radius of the sphere.
- Angle 2: Test