Part SliceApart/de: Difference between revisions
(Created page with "Die Ausgabeform nimmt den gleichen Platz ein wie das Original. Sie wird jedoch dort wo andere Formen überschnitten werden, gekappt. Die gekappten Teile sind einzelne Stücke.") |
No edit summary |
||
Line 30: | Line 30: | ||
Bitte |
Bitte besuche die Seite [[Part Slice/de|Formteil kappen]] für weitere Informationen. |
||
===Tree structure of Slice Apart=== |
===Tree structure of Slice Apart=== |
Revision as of 16:14, 8 February 2020
Part AuseinanderKappen |
Menüeintrag |
---|
Formteil → Trennen → Auseinander Kappen |
Arbeitsbereich |
Part |
Standardtastenkürzel |
Keiner |
Eingeführt in Version |
0.18.15506 |
Siehe auch |
Part Kappen zu Verbund, Part Verbund Sprengen |
Beschreibung
Werkzeug zum kappen von Formen durch Überschneiden mit anderen Formen. Beispielsweise werden für einen Quader und eine Ebene zwei Volumenkörper erzeugt.
Auf dem Bild oben wurden die Stücke anschließend von Hand auseinandergeschoben, um das Kappen sichtbar zu machen.
Auseinander kappen ist dasselbe wie Formteil kappen, gefolgt von Formteil Sprenge Verbund. Während "Kappen zu Verbund" vollparametrisch ist und keine Probleme verursacht, wenn sich die Anzahl der Teile ändert, "Auseinander kappen" aktualisiert nicht die Anzahl der Objekte, wenn sich die Anzahl der Stücke ändert. Beide erzeugen ein parametrisches Kapp Grundelement, das die geschnittenen Teile in einen Verbund bringt, aber "Auseinander kappen" sprengt den resultierenden Verbund in separate Objekte.
Die Ausgabeform nimmt den gleichen Platz ein wie das Original. Sie wird jedoch dort wo andere Formen überschnitten werden, gekappt. Die gekappten Teile sind einzelne Stücke.
Bitte besuche die Seite Formteil kappen für weitere Informationen.
Tree structure of Slice Apart
The Slice Apart command creates more than only the sliced object. In the following example a cube is sliced by a face.
The slice is created and for each piece of it there is a Part CompoundFilter created, thus the same slice occurs multiple times below each CompundFilter. All these CompoundFilters are united in a Compound.
Example: making puzzle
See Part Slice Example Steps 1 to 6
Scripting
The tool can by used in macros and from the python console by using the following function:
BOPTools.SplitFeatures.makeSlice(name)
Set mode to split for slice apart
- Creates an empty Slice feature. The 'Base' and 'Tools' properties must be assigned explicitly, afterwards.
- Returns the newly created object.
Slice can also be applied to plain shapes, without the need to have a document object, via:
BOPTools.SplitAPI.slice(base_shape, tool_shapes, mode, tolerance = 0.0)
This can be useful for making custom Python scripted features.
Example:
import BOPTools.SplitFeatures
j = BOPTools.SplitFeatures.makeSlice(name= 'Slice')
j.Base = FreeCADGui.Selection.getSelection()[0]
j.Tools = FreeCADGui.Selection.getSelection()[1:]
The tool itself is implemented in Python, see /Mod/Part/BOPTools/SplitFeatures.py under where FreeCAD is installed.
Version
Slice Apart wurde in FreeCAD v0.18.15506 eingeführt. FreeCAD muss mit OCC 6.9.0 oder höher kompiliert werden. Andernfalls ist das Tool nicht verfügbar.
- Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder
- Creation and modification: Extrude, Revolve, Mirror, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment
- Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Measure: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub