Part Coupes

From FreeCAD Documentation
Revision as of 16:45, 22 April 2018 by Normandc (talk | contribs) (Created page with "L'outil '''Coupes''' créé une ou plusieurs coupes à travers la forme sélectionnée.")

Coupes...

Emplacement du menu
Pièce → Coupes...
Ateliers
Part
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
Section

Description

L'outil Coupes créé une ou plusieurs coupes à travers la forme sélectionnée.

How to use

  1. Select a shape.
  2. Press the Cross-sections button.
  3. Define the guiding plane.
  4. Define the position (height of the cross-section).
  5. Optionally, check Sections to create more than one cross-section:
    • Checking On both sides will distribute the cross-sections on each side of the guiding plane location.
    • Set the count.
  6. Press OK.

Limitations

  • The resulting object is not parametric, that is it is not linked to the original shape.
  • A single object is created, even with more than one cross-section.

Example

Sélectionner un objet

Fenêtre de dialogue

Résultat