Part CrossSections/fr: Difference between revisions

From FreeCAD Documentation
No edit summary
(Updating to match new version of source page)
Line 11: Line 11:
The '''Cross-sections''' utility creates one or more cross-sections through the selected shape.
The '''Cross-sections''' utility creates one or more cross-sections through the selected shape.


==How to use==
==How to use ==


# Select a shape.
# Select a shape.

Revision as of 16:45, 22 April 2018

Coupes...

Emplacement du menu
Pièce → Coupes...
Ateliers
Part
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
Section

Description

The Cross-sections utility creates one or more cross-sections through the selected shape.

How to use

  1. Select a shape.
  2. Press the Cross-sections button.
  3. Define the guiding plane.
  4. Define the position (height of the cross-section).
  5. Optionally, check Sections to create more than one cross-section:
    • Checking On both sides will distribute the cross-sections on each side of the guiding plane location.
    • Set the count.
  6. Press OK.

Limitations

  • The resulting object is not parametric, that is it is not linked to the original shape.
  • A single object is created, even with more than one cross-section.

Example

Sélectionner un objet

Fenêtre de dialogue

Résultat