Díl Vyčistit tvar

From FreeCAD Documentation
Revision as of 13:46, 28 August 2021 by Heda (talk | contribs)

Díl Vyčistit tvar

Umístění Menu
Díl → Vyčistit tvar
Pracovní stoly
Díl, OpenSCAD
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
Nikdo

Popis

Vyčistí zbytečné čáry. Po logických operacích zůstávají viditelné čáry, které definovaly původní tvary. Nástroj vytváří kopii vyčištěného objektu.

The Part RefineShape produces a non-parametric copy with a refined shape, that is, with certain edges and faces cleaned up.

After certain boolean operations, like Part Fuse, some lines from the previous shapes may remain visible. This tool produces a copy of that boolean result, and cleans up those seams.

Alternatively, to produce other non-parametric copies use Simple Copy, Transformed Copy, and Element Copy

Original boolean result with 11 faces (left), and refined shape copy with 7 faces (right).

Použití

  1. Vyberte tvar, který má být vyčištěn.
  2. Klikněte na menu Díl → Vyčistit tvar.
  • Je vytvořena kopie objektu a je kompletně vyčištěna, původní objekt je skryt.
  • Nově vytvořená kopie je nezávislá na originálu.
  1. Select an object that you wish to clean and copy.
  2. Go to the menu Part → Create a copy → Refine shape.
  3. A cleaned, independent copy of the original object is created; the original object is hidden.

As of version 0.19 and above the result defaults to a parametric (linked) copy.

This behavior can be changed in the Parameter editor:

  1. Go to the subgroup: BaseApp/Preferences/Mod/Part
  2. Change ParametricRefine of type Boolean to false to get the old behavior (independent copy).

See other parameters in Fine-tuning.

Notes

  • This function can be used as the last step in the modelling work to clean up shapes in a traditional constructive solid geometry workflow.
  • This function may help to clean up the model before applying another feature, such as a Fillet.
  • This clean up may stop 3D printers from printing unwanted edges once the solid model is exported to a mesh format.
  • This function can also be used after converting a mesh to a shape (ShapeFromMesh) to clean up the residual edges on flat faces.

Limitations

  • The refinement algorithm only works on shells. Therefore it iterates over the shells of the input shape and then for each shell it creates a new shell with joined faces wherever possible. This means that if your input shape is only a face, wire, edge or vertex then the algorithm does nothing.
  • Unlike the OpenSCAD RefineShapeFeature command, Part RefineShape won't update when the preceding shapes are changed.

Scripting

The Python command for refining a shape is the following:

shape.removeSplitter()

The Part RefineShape command can be applied after selecting one or more objects in the Tree view:

FreeCADGui.runCommand('Part_RefineShape')

The selection can be manual (by using the mouse), or via the Python console.
To know more about selecting objects programmatically, refer to Selection methods.