Part: Plane

From FreeCAD Documentation
Revision as of 16:44, 30 August 2021 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Part CreatePrimitives

Menu location
PartCreate Primitives → Plane
Workbenches
Part, OpenSCAD
Default shortcut
None
Introduced in version
-
See also
Create Primitives

Description

Descriere

Create a simple parametric plane 10 x 10 mm, with the parameters of position, length, and width. By default, the plane is positioned at the origin (0,0,0).

Cum se utilizează

The standard plane is created with its lower left corner at the origin point 0,0,0. To change these parameters, open the Location section and enter the desired values ​​in the respective input fields, or click on the 3D view and select a point, the point coordinates are taken from the fields. In the Direction menu you can also define a standard vector (X, Y or Z) normal to the plane, or click User Defined ... to open the dialog box that allows you to set a different carrier (eg direction 1.0 , -1 creates a plane inclined 45 ° with respect to X and Z).

The standard plane is created with its lower left corner at the origin point 0,0,0. To change these parameters, open the Location section and enter the desired values ​​in the respective input fields, or click on the 3D view and select a point, the point coordinates are taken from the fields. In the Direction menu you can also define a standard vector (X, Y or Z) normal to the plane, or click User Defined ... to open the dialog box that allows you to set a different carrier (eg. direction 1.0 , -1 creates a plane inclined 45° with respect to X and Z).

The properties can be changed later in the Combined View → Data, after selecting the item.

Properties

Data

Base

  • DateLabel : String name of the object, defaults to 'Plane'. User may rename it.
  • DatePlacement: Placement of feature is defined by below angle, axis and position.
  • DateAngle : Angle of rotation relative to the below axis.
  • DateAxis : Defines the axis of rotation plane: X, Y, or Z. Defaults to Z axis, Z = 1
  • DatePosition : Position X, Y, Z, relative to the origin 0, 0, 0.

Plane

  • DateLength : Length is the dimension along the X axis The default value is 10 mm
  • DateWidth : Width is the size of the Y-axis The default value is 10 mm

View

You have the standard properties view.