Part: Offset 3D

From FreeCAD Documentation
Revision as of 18:53, 10 May 2019 by Renatorivo (talk | contribs) (Created page with "# Option ː Intersection ː Consente gli offset rivolti verso l'interno per "sovrapporre" il gap intersecando la forma risultante fino a raggiungere le facce opposte. # Optio...")

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Offset 3D

Posizione nel menu
Part → Offset 3D
Ambiente
Part
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Spessore, Offset 2D


Descrizione

Lo strumento Offset 3D di Parte crea delle copie parallele di una forma selezionata ad una certa distanza dalla forma base, dando un nuovo oggetto.

Utilizzo

Selezionare l'oggetto da cui si vuole creare l'offset.

  1. Premere il pulsante Offset 3D, e regolare la distanza e i parametri che dipendono dall'oggetto originale e dagli oggetti risultanti.

Proprietà

  1. Offset  : Distanza a cui sfalsare le facce della forma
  2. Mode  : Modalità di creazione. Skin crea una nuova forma attorno alla forma sorgente. Pipe ( todo ) . RectoVerso ( todo )
  3. Join type : Come si costruiscono i nuovi angoli. Intersection dà angoli acuti sull'estensione lineare dei bordi. Arc e Tangent danno angoli arrotondati.
  1. Option ː Intersection ː Consente gli offset rivolti verso l'interno per "sovrapporre" il gap intersecando la forma risultante fino a raggiungere le facce opposte.
  2. Option ː Self Intersection ː ( todo )
  3. Option ː Fill Offset ː Quando la forma è bidimensionale, lo spazio tra le 2 forme viene riempito. Il riempimento ora è un solido, ma la forma sorgente non è un solido. Quindi le operazioni booleane possono portare a risultati strani. (vedi esempio).



Object with small offset and rounded ( arc ) corners.


Same object with sharp ( intersection ) corners.

Same object with thick distance overfilling the front left gap and allowed intersections.

Arbitrary shape ( draft poly as wire ) with a 3D Offset ( ignores MODE param )

same shape with a 3D Offset as SKIN and filled offset

filled offset with 2 Cylinders creating boolean cuts. Cylinder A goes through the FILL whilst Cylinder B only goes thru the FILL and NOT through the source 2D shape.