Part Décaler en 3D

From FreeCAD Documentation
Revision as of 11:31, 10 August 2019 by David69 (talk | contribs)

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Décalage

Emplacement du menu
Pièce →3D Offset
Ateliers
Part
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
Épaisseur de paroi, Décalage 2D


Description

L'outil Décalage 3D de la pièce crée des copies parallèles d'une forme sélectionnée à une certaine distance de la forme de base, créant ainsi un nouvel objet.

Comment l'utiliser

Sélectionnez l'objet pour lequel vous souhaitez créer le décalage.

  1. Appuyez sur le bouton 3D Offset et ajustez la distance et les paramètres en fonction de l'objet d'origine et de la validité des objets résultants.

Exemple

  1. Offset  : Distance to offset the faces of the shape
  2. Mode  : Mode of creation . Skin creates a new shape around the source shape. Pipe ( todo ) . RectoVerso ( todo )
  3. Join type : How the new corners are build up. Intersection gives sharp corners by linear extension of the edges. Arc and Tangent give rounded corners.
  1. Option ː Intersection ː Allows offsets pointing inwards to "overflood" the gap by intersecting the resulting shape until opposite faces are reached.
  2. Option ː Self Intersection ː ( todo )
  3. Option ː Fill Offset ː When the shape was 2 dimensional , the gap inbetween the 2 shapes gets filled. The fill is now a solid, hence the source shape is not a solid . Thus boolean operations may lead to strange results. ( see exapmple ) .



Object with small offset and rounded ( arc ) corners.


Same object with sharp ( intersection ) corners.

Same object with thick distance overfilling the front left gap and allowed intersections.

Arbitrary shape ( draft poly as wire ) with a 3D Offset ( ignores MODE param )

same shape with a 3D Offset as SKIN and filled offset

filled offset with 2 Cylinders creating boolean cuts. Cylinder A goes through the FILL whilst Cylinder B only goes thru the FILL and NOT through the source 2D shape.