Part Spiegeln
Part Spiegelung |
Menüeintrag |
---|
Formteil → Spiegelung... |
Arbeitsbereich |
Part, Complete (veraltet) |
Standardtastenkürzel |
Keiner |
Eingeführt in Version |
- |
Siehe auch |
Keiner |
Einleitung
'Spiegelungsobjekt' - Dieses Werkzeug erzeugt ein neues Objekt (Bild), welches eine Spiegelung des ursprünglichen Objekts (Quelle) ist. Das Bildobjekt wird hinter einer Spiegelungsebene erstellt. Die Spiegelungsebene kann eine Standardebene (XY, YZ oder XZ) sein oder jegliche Ebene parallel zu einer Standardebene.
Ein Beispiel:
Anwendung
Wähle das Quellobjekt aus der Liste. Wähle eine Standard-Spiegelungsebene aus der Dropbox. Drücke OK, um das Image-Objekt zu erstellen.
Options
The Base point boxes can be used to move the mirror plane parallel to the selected standard miror plane. Only one of the X, Y, or Z boxes is effective for a given standard plane.
Standard Plane | Base Point Box | Effect |
---|---|---|
XY | Z | Move mirror plane along Z axis. |
XY | X, Y | No effect. |
XZ | Y | Move mirror plane along Y axis. |
XZ | X, Z | No effect. |
YZ | X | Move mirror plane along X axis. |
YZ | Y, Z | No effect. |
Limitations
- Arbitrary mirror planes (ie not parallel to a standard plane) are not supported (as of FC version 0.13).