Part Helix/cs: Difference between revisions

Revision as of 21:30, 1 May 2014

Umístění Menu
Díl Šroubovice
Díl → Vytváření zákl.geom.tvarů → Šroubovice
Pracovní stoly
Díl, OpenSCAD
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
..

Základní geometrické tvary

Šroubovice

Parametr

Stoupání
Výška
Poloměr
Úhel
Levotočivá nebo pravotočivá

Umístění

How to use

Parameter

Pitch:The pitch corresponds to the space between two consecutive "turns" of the helix measured along the main axis of the helix.
Height: The height corresponds to the overall height of the helix measured along the main axis of the helix.
Radius: The radius corresponds to the radius of the circle built by the helix by viewing the helix from the top / bottom.
Angle: Per default the helix is built on a imaginary cylinder. With this option it is possible to build the helix on a imaginay conus. This angle corresponds to the angle of the conus. The value must be comprised between -90 deg and +90 deg.
Right-handed or Left-handed: This parameter specifies the handedness of the helix.

Location

X: The main axis of the helix will be translated along the x axis of the value you indicate in this field.
Y: The main axis of the helix will be translated along the y axis of the value you indicate in this field.
Z: The main axis of the helix will be translated along the z axis of the value you indicate in this field.
Direction: Per default the main axis of the helix is the z axis. Here you have the possibility to edit the main axis of the helix. If you select the parameter "user defined..." , you will be invited to indicate the main axis of the helix by entering the coordinates of its vector.
3D View: ?

Options

Vlastnosti

Pohled

..

Data

Základ

DatiOznačení:
DatiUmístění:

Souřadnice ...

DatiMístní souřadnice:

Šroubovice

DatiÚhel :
DatiVýška :
DatiStoupání :
DatiPoloměr :

Base
Placement

Angle: The helix will be rotated around the main axis of the helix of the value in deg you enter.

|}

Scripting

Other languages:

@@ Line 17: / Line 17: @@
 *
 |}
+== How to use ==
+{|
+| [[File:PartHelixPrimitivesOptions_en.png| 400px]]
+|
+====Parameter====
+* {{Parameter|Pitch:}}The pitch corresponds to the space between two consecutive "turns" of the helix measured along the main axis of the helix.
+* {{Parameter|Height:}} The height corresponds to the overall height of the helix measured along the main axis of the helix.
+* {{Parameter|Radius:}} The radius corresponds to the radius of the circle built by the helix by viewing the helix from the top / bottom.
+* {{Parameter|Angle}}: Per default the helix is built on a imaginary cylinder. With this option it is possible to build the helix on a imaginay conus. This angle corresponds to the angle of the conus. The value must be comprised between -90 deg and +90 deg.
+* {{Parameter|Right-handed or Left-handed:}} This parameter specifies the [https://en.wikipedia.org/wiki/Screw_thread handedness] of the helix.
+====Location====
+* {{Parameter|X:}} The main axis of the helix will be translated along the x axis of the value you indicate in this field.
+* {{Parameter|Y:}} The main axis of the helix will be translated along the y axis of the value you indicate in this field.
+* {{Parameter|Z:}} The main axis of the helix will be translated along the z axis of the value you indicate in this field.
+* {{Parameter|Direction:}} Per default the main axis of the helix is the z axis. Here you have the possibility to edit the main axis of the helix. If you select the parameter "user defined..." , you will be invited to indicate the main axis of the helix by entering the coordinates of its vector.
+* {{Parameter|3D View:}} ?
+|}
+== Options ==
 ===Vlastnosti===
@@ Line 37: / Line 58: @@
 |}
+{{KEY|Base}}<br>
+Placement <br>
+*{{Parameter|Angle:}} The helix will be rotated around the main axis of the helix of the value in deg you enter.
+|}
+== Scripting ==
 {{clear}}