Part: Racordarea/Rotunjirea colțurilor

From FreeCAD Documentation
Revision as of 03:46, 26 February 2020 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Part Fillet

poziția meniului
Part → Fillet
Ateliere
Part, Complete
scurtătură
nici unul
Prezentat în versiune
-
A se vedea, de asemenea,
Part Chamfer

Descriere

Acest instrument se aplică o pilire (rotunjite) la colțurile/muchiile selectate ale unui obiect. O casetă de dialog vă permite să alegeți obiectele și marginile pe care să lucrați.

This tool creates a fillet (round) on the selected edges of an object. A dialog allows you to choose which objects and which edges to work on.

Utilizare

  • Porniți instrumentul din bara de instrumente Part sau din meniu. Puteți selecta obiectul înainte sau după pornirea instrumentului.
  • Dacă forma nu a fost selectată înainte de a porni instrumentul, selectați-o din lista derulantă Shape din TaskPanel.
  • Selectați tipul de rotunjire, fie cu raza constantă (implicită), fie cu raza variabilă.
  • Selectați marginile fie în vizualizarea modelului 3D, fie bifând-le în lista de margini din TaskPanel.
  • Setați valoarea razei.
  • Click pe OK pentru a valida.
  • Start the tool from the Part toolbar or from the menu. You can either select the object before or after starting the tool.
  • If the shape was not selected prior to starting the tool, select it in the Shape drop down list in the Task Panel.
  • Select the fillet type, either constant radius (default) or variable radius.
  • Select the edges either in the 3D view, or by ticking them in the edge list in Task Panel.
  • Set the radius value.
  • Click OK to validate.

sau în Linux

Part Fillet VS. PartDesign Fillet

There is another fillet tool in the PartDesign workbench. Please note that their operation is quite different. Check out the PartDesign Fillet reference page for more details on their differences.

Notes on application of Part Fillet

The fillet tool sometimes fails when trying to fillet complex objects. A common cause of this may be that the shape being filleted is not geometrically correct. This may be the result of lines/planes etc not being removed after previous operations used to construct the shape ( e.g. Cut/Intersection/Fusion). A number of steps can be used to minimize problems:

  • Where possible leave filleting a part until the part is completely generated. This will minimize interaction of fillets with subsequent Boolean operations;
  • Use the Part → Check Geometry to check for any errors in the shape geometry and correct;
  • Use Part → Refine shape to remove any artifacts introduced by previous Boolean operations before filleting (and in some cases between filleting operations in sequence);
  • Consider using Edit → Preferences → PartDesign to enable automatic checking and refining of the model after Boolean and sketch based operations (performance may be affected if these options are left switched on).


The fillet tool sometimes fails when trying to fillet complex objects. A common cause of this may be that the shape being filleted is not geometrically correct. This may be the result of lines/planes etc not being removed after previous operations used to construct the shape ( e.g. Cut/Intersection/Fusion). A number of steps can be used to minimize problems:

  • Where possible leave filleting a part until the part is completely generated. This will minimize interaction of fillets with subsequent Boolean operations;
  • Use the Part → Check Geometry to check for any errors in the shape geometry and correct;
  • Use Part → Refine shape to remove any artifacts introduced by previous Boolean operations before filleting (and in some cases between filleting operations in sequence);
  • Consider using Edit → Preferences → PartDesign to enable automatic checking and refining of the model after Boolean and sketch based operations (performance may be affected if these options are left switched on).


Also note that the part Fillet feature is affected by the Topological naming problem when the any change is done to a modeling step earlier in the chain that affects the number of facets or vertices. This could cause unpredictable result. Until that is resolved (possibly with V0.19) it is advised to apply Chamfer and Fillet operations at the last steps in the chain.