Part Verrundung

From FreeCAD Documentation
Revision as of 19:36, 1 March 2014 by Renatorivo (talk | contribs) (Created page with "== Beschreibung == Dieses Werkzeug erzeugt eine Verrundung auf den ausgewählten Kanten eines Objekts. Die Auswahl des Objekts und der Kanten, die verrundet werden sollen, er...")

Part Fillet

Menu location
Part → Fillet
Workbenches
Part, Complete
Default shortcut
None
Introduced in version
-
See also
Part Chamfer

Beschreibung

Dieses Werkzeug erzeugt eine Verrundung auf den ausgewählten Kanten eines Objekts. Die Auswahl des Objekts und der Kanten, die verrundet werden sollen, erfolgt in einem Dialog.

Usage

  • Start the tool from the Part toolbar or from the menu. You can either select the object before or after starting the tool.
  • If the shape was not selected prior to starting the tool, select it in the Shape drop down list in the TaskPanel.
  • Select the fillet type, either constant radius (default) or variable radius.
  • Select the edges either in the 3D model view, or by ticking them in the edge list in TaskPanel.
  • Set the radius value.
  • Click OK to validate.


Part Fillet VS. PartDesign Fillet

There is another fillet tool in the PartDesign workbench. Please note that their operation is quite different. Check out the PartDesign Fillet reference page for more details on their differences.