Part Fillet: Difference between revisions

From FreeCAD Documentation
mNo edit summary
No edit summary
Line 20: Line 20:
=== Part Fillet VS. PartDesign Fillet === <!--T:5-->
=== Part Fillet VS. PartDesign Fillet === <!--T:5-->
There is another fillet tool in the PartDesign workbench. Please note that their operation is quite different. Check out the [[PartDesign Fillet]] reference page for more details on their differences.
There is another fillet tool in the PartDesign workbench. Please note that their operation is quite different. Check out the [[PartDesign Fillet]] reference page for more details on their differences.


=== Notes on application of Part Fillet ===<!--T:6-->
The fillet tool sometimes fails when trying to fillet complex objects.
A common cause of this may be that the shape being filleted is not geometrically correct. This may be the result of lines/planes etc not being removed after previous operations used to construct the shape ( e.g. Cut/Intersection/Fusion). A number of steps can be used to minimize problems:
* Where possible leave filleting a part until the part is completely generated. This will minimize interaction of fillets with subsequent Boolean operations;
* Use the Part->Check Geometry to check for any errors in the shape geometry and correct;
* Use Part->Refine shape to remove any artifacts introduced by previous Boolean operations before filleting (and in some cases between filleting operations in sequence)
* Consider using Edit->Preferences->PartDesign to enable automatic checking and refining of the model after Boolean and sketch based operations (performance may be affected if these options are left switched on)


</translate>
</translate>

Revision as of 08:41, 19 December 2015

Part Fillet

Menu location
Part → Fillet
Workbenches
Part, Complete
Default shortcut
None
Introduced in version
-
See also
Part Chamfer

Description

This tool creates a fillet (round) on the selected edges of an object. A dialog allows you to choose which objects and which edges to work on.

Usage

  • Start the tool from the Part toolbar or from the menu. You can either select the object before or after starting the tool.
  • If the shape was not selected prior to starting the tool, select it in the Shape drop down list in the TaskPanel.
  • Select the fillet type, either constant radius (default) or variable radius.
  • Select the edges either in the 3D model view, or by ticking them in the edge list in TaskPanel.
  • Set the radius value.
  • Click OK to validate.


Part Fillet VS. PartDesign Fillet

There is another fillet tool in the PartDesign workbench. Please note that their operation is quite different. Check out the PartDesign Fillet reference page for more details on their differences.


Notes on application of Part Fillet

The fillet tool sometimes fails when trying to fillet complex objects. A common cause of this may be that the shape being filleted is not geometrically correct. This may be the result of lines/planes etc not being removed after previous operations used to construct the shape ( e.g. Cut/Intersection/Fusion). A number of steps can be used to minimize problems:

  • Where possible leave filleting a part until the part is completely generated. This will minimize interaction of fillets with subsequent Boolean operations;
  • Use the Part->Check Geometry to check for any errors in the shape geometry and correct;
  • Use Part->Refine shape to remove any artifacts introduced by previous Boolean operations before filleting (and in some cases between filleting operations in sequence)
  • Consider using Edit->Preferences->PartDesign to enable automatic checking and refining of the model after Boolean and sketch based operations (performance may be affected if these options are left switched on)