Díl Vysunutí
Díl Vysunutí |
Umístění Menu |
---|
Díl -> Vysunutí |
Pracovní stoly |
Modul Díl, Kompletace |
Výchozí zástupce |
Nikdo |
Představen ve verzi |
- |
Viz také |
Nikdo |
Popis
Parametrická vlastnost Vysunutí je dostupná v pracovní ploše Díl z nástrojového pruhu a menu Díl. Vysunutí roztáhne rovinný tvar na definovanou délku podle zadaného směru. Výstupní tvar se změní podle vstupního tvaru a vybraných voleb.
In most common scenarios, the following lists the expected output shape type from a given input shape type,
- Extrude a Vertex (point), will produce a lineal Edge (Line)
- Extrude a open edge (e.g. line, arc), will produce a open face (e.g. plane)
- Extrude a closed edge (e.g. circle), will optionally produce a closed face (e.g. an open ended cylinder) or if the parameter "solid" is "true" will produce a solid (e.g. a closed solid cylinder)
- Extrude a open Wire (e.g. a Draft Wire), will produce a open shell (several joined faces)
- Extrude a closed Wire (e.g. a Draft Wire), will optionally produce a shell (several joined faces) or if the parameter "solid" is "true" will produce a solid
- Extrude a face (e.g. plane), will produce a solid (e.g. Cuboid)
- Extrude a Draft Shape String, will produce a compound of solids (the string is a compound of the letters which are each a solid)
Parameters
The parametric rectangular cuboid is defined by the parameters
- Base, - the input shape, (the shape upon which the Part Extrude was applied)
- Dir, the direction and distance to extend the shape, as defined by a specified distance in each of the x, y and Z axis.
- solid, true or false, toggles between a surface or a solid where not other wise defined by the nature of the extrusion
- Taper Angle,
- Placement, the standard placement parameters
- Label,