Эллипс

From FreeCAD Documentation
Revision as of 20:23, 6 August 2018 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Эллипс

Системное название
Part Ellipse
Расположение в меню
Деталь → Создать примитивы... → Эллипс
Верстаки
Part, OpenSCAD
Быстрые клавиши
Нет
Представлено в версии
-
См. также
..

Description

An Ellipse geometric primitive is available from the Create Primitives dialogue in the Part workbench.

The Create Primitives dialogue can be accessed via the CreatePrimitives icon located in the Part menu or the Part toolbar, in the Part Workbench.

This command will create a elliptical curved edge. With the default values, the elliptical curved edge will be closed and therefore will be an ellipse. If the properties Angle 1 or Angle 2 are changed from their default values (0 and 360) the edge will be an open curve.

Properties

  • Major radius: the major radius of the ellipse, the default value is 4
  • Minor radius: the minor radius of the ellipse, the default value is 2
  • Angle 1: start of the edge of the ellipse or elliptical curved edge, (degrees anti-clockwise), the default value is 0
  • Angle 2: end of the edge of the ellipse or elliptical curved edge, (degrees anti-clockwise), the default value is 360