Part: Elipsă

From FreeCAD Documentation
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
This page is a translated version of the page Part Ellipse and the translation is 4% complete.
Outdated translations are marked like this.

Part Ellipse

Menu location
Part → Create Primitives → Ellipse
Workbenches
Part, OpenSCAD
Default shortcut
None
Introduced in version
-
See also
..

Descriere

Un element primitiv geometric este Elipsa care este disponibil din dialogul Create Primitives în Atelierul de lucru Part.

Această comandă va crea o muchie curbată circulară. Cu valorile implicite, muchia curbată circulară va fi închisă și, prin urmare, va fi o elipsă. Dacă proprietățile Unghi 0 sau Unghi 1 sunt modificate din valorile implicite (0 și 360) marginea va fi o curbă deschisă, un arc de elipsă.

A Part Ellipse is in fact a closed counterclockwise elliptical arc, it can be turned into an arc by changing its DateAngle1 and/or DateAngle2 properties.

Usage

See Part Primitives.

Example

Part Ellipse from the scripting example

A Part Ellipse object created with the scripting example below is shown here.

Properties

See also: Property editor.

A Part Ellipse object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:

Data

Attachment

The object has the same attachment properties as a Part Part2DObject.

Base

  • DateMajorRadius (Length): The major radius of the ellipse or elliptical arc. The default is 4mm.
  • DateMinorRadius (Length): The minor radius of the ellipse or elliptical arc. The default is 2mm.
  • DateAngle1 (Angle): The start angle of the elliptical arc. Valid range: 0° < value <= 360°. The default is .
  • DateAngle2 (Angle): The end angle of the elliptical arc. Valid range: 0° < value <= 360°. The default is 360°. If DateAngle1 and DateAngle2 are equal, or if one angle is and the other 360°, a full ellipse is created.

Scripting

See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.

A Part Ellipse can be created with the addObject() method of the document:

ellipse = FreeCAD.ActiveDocument.addObject("Part::Ellipse", "myEllipse")
  • Where "myEllipse" is the name for the object.
  • The function returns the newly created object.

Example:

import FreeCAD as App

doc = App.activeDocument()

ellipse = doc.addObject("Part::Ellipse", "myEllipse")
ellipse.MajorRadius = 20
ellipse.MinorRadius = 10
ellipse.Angle1 = 45
ellipse.Angle2 = 135
ellipse.Placement = App.Placement(App.Vector(1, 2, 3), App.Rotation(30, 45, 10))

doc.recompute()