Part Ellipse

From FreeCAD Documentation
Revision as of 19:36, 29 August 2021 by Roy 043 (talk | contribs)
Jump to navigation Jump to search
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎română • ‎čeština • ‎русский

Template:UnfinishedDocu/es

Arrow-left.svg Previous: Part Circle.svg Circle
Next: Point Part Point.svg Arrow-right.svg

Part Ellipse.svg Part Ellipse

Ubicación en el Menú
Part → Create Primitives → Ellipse
Entornos de trabajo
Part, OpenSCAD
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
..

Description

This command will create a elliptical curved edge. With the default values, the elliptical curved edge will be closed and therefore will be an ellipse. If the properties Angle 1 or Angle 2 are changed from their default values (0 and 360) the edge will be an open curve.

Usage

The Create Primitives dialogue can be accessed via the Primitives icon Part Primitives.svg located in the Part menu or the Part toolbar, in the Part Workbench.


Properties

  • Major radius: the major radius of the ellipse, the default value is 4
  • Minor radius: the minor radius of the ellipse, the default value is 2
  • Angle 1: start of the edge of the ellipse or elliptical curved edge, (degrees anti-clockwise), the default value is 0
  • Angle 2: end of the edge of the ellipse or elliptical curved edge, (degrees anti-clockwise), the default value is 360


Arrow-left.svg Previous: Part Circle.svg Circle
Next: Point Part Point.svg Arrow-right.svg