Part Cylinder/sv: Difference between revisions
Renatorivo (talk | contribs) (Created page with "Cylindern kommer att placeras vid nollpunkten (punkt 0,0,0) när den skapas.") |
Renatorivo (talk | contribs) (Created page with "Vinkelparametern tillåter att en del av en cylinder skapas (den är som standard 360°).") |
||
Line 8: | Line 8: | ||
The properties can later be edited in the data tab for the cylinder: |
The properties can later be edited in the data tab for the cylinder: |
||
Vinkelparametern tillåter att en del av en cylinder skapas (den är som standard 360°). |
|||
The angle parameter permits the creation of a portion of cylinder (it is set to 360° by default). |
|||
The height is the distance in the z-axis. |
The height is the distance in the z-axis. |
Revision as of 19:46, 20 February 2014
Part_Cylinder |
Menyplacering |
---|
Ingen |
Arbetsbänkar |
Del,Komplett |
Standard genväg |
Ingen |
Introducerad i version |
- |
Se även |
Ingen |
Skapar en enkel parametrisk cylinder, med parametrarna position, vinkel, radie och höjd.
Cylindern kommer att placeras vid nollpunkten (punkt 0,0,0) när den skapas.
The properties can later be edited in the data tab for the cylinder:
Vinkelparametern tillåter att en del av en cylinder skapas (den är som standard 360°).
The height is the distance in the z-axis.
The radius defines a plane in x-y.