Part Cylinder/sv: Difference between revisions
Renatorivo (talk | contribs) (Created page with "Skapar en enkel parametrisk cylinder, med parametrarna position, vinkel, radie och höjd.") |
Renatorivo (talk | contribs) (Created page with "Cylindern kommer att placeras vid nollpunkten (punkt 0,0,0) när den skapas.") |
||
| Line 4: | Line 4: | ||
Skapar en enkel parametrisk cylinder, med parametrarna position, vinkel, radie och höjd. |
Skapar en enkel parametrisk cylinder, med parametrarna position, vinkel, radie och höjd. |
||
Cylindern kommer att placeras vid nollpunkten (punkt 0,0,0) när den skapas. |
|||
The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm. |
|||
The properties can later be edited in the data tab for the cylinder: |
The properties can later be edited in the data tab for the cylinder: |
||
Revision as of 19:46, 20 February 2014
|
|
| Menyplacering |
|---|
| Ingen |
| Arbetsbänkar |
| Del,Komplett |
| Standard genväg |
| Ingen |
| Introducerad i version |
| - |
| Se även |
| Ingen |
Skapar en enkel parametrisk cylinder, med parametrarna position, vinkel, radie och höjd.
Cylindern kommer att placeras vid nollpunkten (punkt 0,0,0) när den skapas.
The properties can later be edited in the data tab for the cylinder:
The angle parameter permits the creation of a portion of cylinder (it is set to 360° by default).
The height is the distance in the z-axis.
The radius defines a plane in x-y.
