Part Cylinder: Difference between revisions

From FreeCAD Documentation
m (Linted templates)
m (tweaked usage)
Line 23: Line 23:


==Usage== <!--T:10-->
==Usage== <!--T:10-->
# Open the {{Button|[[Image:Workbench_Part.svg|16px]] [[Part Workbench|Part]]}} Workbench.
In the workbench [[Part_Workbench|Part]] click on the cube icon [[Image:Part_Cylinder.png|32px]]. The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.
# Press the {{Button|[[Image:Part_Cylinder.svg|24px]]}} button in the toolbar, or use the {{MenuCommand|Part → Cylinder}} from the top menu.

'''Result:''' The default result is for a full cylinder is to be centered by one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.


== Options == <!--T:11-->
== Options == <!--T:11-->

Revision as of 15:39, 7 February 2020

Part Cylinder

Menu location
Part → Cylinder
Workbenches
Part
Default shortcut
None
Introduced in version
-
See also
Part CreatePrimitives

Description

Creates a simple parametric cylinder, with position, angle, radius and height parameters.

Usage

  1. Open the Part Workbench.
  2. Press the button in the toolbar, or use the Part → Cylinder from the top menu.

Result: The default result is for a full cylinder is to be centered by one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.

Options

The properties can later be edited in the data tab for the cylinder:

a cylinder created with the Cylinder tool

Cylinder

  • Angle: The angle parameter permits the creation of a portion of cylinder (it is set to 360° by default)
  • Height: The height is the distance in the z-axis
  • Radius: The radius defines a plane in x-y.