Part Cylinder: Difference between revisions

From FreeCAD Documentation
(Marked this version for translation)
No edit summary
Line 42: Line 42:


<!--T:20-->
<!--T:20-->
* {{PropertyData|Angle:}} This is the rotation angle that permits the creation of a portion of cylinder (it is set to 360° by default)
* {{PropertyData|Angle}}: This is the rotation angle that permits the creation of a portion of cylinder (it is set to 360° by default)
* {{PropertyData|Height:}} The height is the distance in the z-axis
* {{PropertyData|Height}}: The height is the distance in the z-axis
* {{PropertyData|Radius:}} The radius defines a plane in x-y.
* {{PropertyData|Radius}}: The radius defines a plane in x-y.
* {{PropertyData|First Angle}}: angle in first direction. {{Version|0.20}}
* {{PropertyData|First Angle}}: Angle in first direction. {{Version|0.20}}
* {{PropertyData|Second Angle}}: angle in second direction. {{Version|0.20}}
* {{PropertyData|Second Angle}}: Angle in second direction. {{Version|0.20}}


<!--T:14-->
<!--T:14-->

Revision as of 09:48, 13 May 2021

Part Cylinder

Menu location
Part → Primitives → Cylinder
Workbenches
Part
Default shortcut
None
Introduced in version
-
See also
Part Primitives

Description

Creates a simple parametric cylinder, with position, angle, radius and height parameters.

Usage

  1. Switch to the Part Workbench
  2. There are several ways to invoke the command:
    • Press the Cylinder button in the toolbar.
    • Select Part → Primitives → Cylinder entry from the top menu

Result: The default result is a full cylinder with a radius of 2 mm and height of 10 mm, centered along the global z-axis and attached to the global xy-plane.

The cylinder properties can later be edited, either in the Property editor or by double-clicking the cylinder in the Tree view.

a cylinder created with the Cylinder tool

Properties

  • DataAngle: This is the rotation angle that permits the creation of a portion of cylinder (it is set to 360° by default)
  • DataHeight: The height is the distance in the z-axis
  • DataRadius: The radius defines a plane in x-y.
  • DataFirst Angle: Angle in first direction. introduced in version 0.20
  • DataSecond Angle: Angle in second direction. introduced in version 0.20