# Part Cone

Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎română • ‎svenska • ‎čeština • ‎русский • ‎中文（中国大陆）‎
Previous: Sphere
Next: Torus

Part Cone

Menyplacering
Part -> Cone
Arbetsbänkar
Part, Complete
Standard genväg
Ingen
-
Se även
Part CreatePrimitives

## Description

A parametric truncated Part Cone primitive is available in the Part workbench from the Part tool bar, Part menu (primitives sub-menu) and the Create Primitives dialogue.

A Part Cone with the parameter "Angle" set to 270 degrees and all other parameters are set to their default values.

## Usage

1. Switch to the Part Workbench
2. There are two ways to invoke the command:
• Press the Cone button in the toolbar.
• Select the Part → Primitives → Cone from the menu bar.

Result: The default values create a truncated parametric cone that is positioned at the origin (point 0,0,0) and attached to the global xy-plane. Its height of 10 mm is along the global z-axis. The lower DataRadius 1 is 2 mm, the upper DataRadius 2 is 4 mm.

The cone properties can later be edited, either in the Property editor or by double-clicking the cone in the Tree view.

## Properties

• DataRadius 1: Radius of the arc or circle defining the lower face
• DataRadius 2: Radius of the arc or circle defining the upper face
• DataHeight: Height of the Part Cone
• DataAngle: Number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360° creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.

## Scripting

A Part Cone can be created using the following function:

```cone = FreeCAD.ActiveDocument.addObject("Part::Cone", "myCone")
```
• Where `"myCone"` is the name for the object.
• The function returns the newly created object.

Previous: Sphere
Next: Torus