Part Cone/it: Difference between revisions
Renatorivo (talk | contribs) (Created page with "===Proprietà===") |
Renatorivo (talk | contribs) (Created page with "===Primitive Geometriche=== {| | File:PartConePrimitivesOptions_it.png | Cono ====Parametri==== * raggio 1, * raggio 2, * altezza, * angolo ====Posizione==== Espandere la ...") |
||
Line 7: | Line 7: | ||
The default values create a truncated parametric cone, defined by radius1, radius2 height and angle, parameters. The default cone will be positioned at origin (point 0,0,0) on creation. The angle parameter permits the creation of a portion of cone (it is set to 360° by default), and the radius 1 and 2 correspond to base and top radius of the truncated cone. |
The default values create a truncated parametric cone, defined by radius1, radius2 height and angle, parameters. The default cone will be positioned at origin (point 0,0,0) on creation. The angle parameter permits the creation of a portion of cone (it is set to 360° by default), and the radius 1 and 2 correspond to base and top radius of the truncated cone. |
||
===Primitive Geometriche=== |
|||
== Parameters == |
|||
{| |
|||
*Radius 1 - radius of the arc or circle defining the lower face |
|||
| [[File:PartConePrimitivesOptions_it.png]] |
|||
*Radius 2 - radius of the arc or circle defining the upper face |
|||
| |
|||
*Height - the height of the Part Cone |
|||
Cono |
|||
*Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii. |
|||
====Parametri==== |
|||
* raggio 1, |
|||
* raggio 2, |
|||
* altezza, |
|||
* angolo |
|||
====Posizione==== |
|||
Espandere la voce Posizione per stabilire: |
|||
* punto di posizionamento nella vista 3D, |
|||
* direzione dell'asse del cono, x, y, z o definita dall'utente. |
|||
Anche le dimensioni e il posizionamento del cono prodotto utilizzando le opzioni di creazione sono modificabili tramite la scheda delle proprietà. |
|||
|} |
|||
Revision as of 21:12, 28 May 2014
Cono |
Posizione nel menu |
---|
Parte → Primitive → Cono |
Ambiente |
Parte, Completo |
Avvio veloce |
Nessuno |
Introdotto nella versione |
- |
Vedere anche |
Parte → Crea primitive... → Cono |
Description
A parametric truncated Part Cone primitive is available in the Part workbench from the Part tool bar, Part menu (primitives sub-menu) and the Create Primitives dialogue.
The default values create a truncated parametric cone, defined by radius1, radius2 height and angle, parameters. The default cone will be positioned at origin (point 0,0,0) on creation. The angle parameter permits the creation of a portion of cone (it is set to 360° by default), and the radius 1 and 2 correspond to base and top radius of the truncated cone.
Primitive Geometriche
Proprietà
File:PartConeProperty it.png |
VistaSono disponibili le Proprietà standard di visualizzazione. Dati
|