Part Cone/it: Difference between revisions
Renatorivo (talk | contribs) (Created page with "{| | File:PartConeProperty_it.png | ==== Vista ==== Sono disponibili le Proprietà standard di visualizzazione. ==== Dati ==== {{KEY/it|Base}}...") |
Renatorivo (talk | contribs) (Created page with "===Proprietà===") |
||
Line 14: | Line 14: | ||
===Proprietà=== |
|||
The image below shows a Part Cone with the parameter "Angle" set to 270 degrees and all other parameters are at their default values. |
|||
{| |
{| |
Revision as of 21:11, 28 May 2014
Cono |
Posizione nel menu |
---|
Parte → Primitive → Cono |
Ambiente |
Parte, Completo |
Avvio veloce |
Nessuno |
Introdotto nella versione |
- |
Vedere anche |
Parte → Crea primitive... → Cono |
Description
A parametric truncated Part Cone primitive is available in the Part workbench from the Part tool bar, Part menu (primitives sub-menu) and the Create Primitives dialogue.
The default values create a truncated parametric cone, defined by radius1, radius2 height and angle, parameters. The default cone will be positioned at origin (point 0,0,0) on creation. The angle parameter permits the creation of a portion of cone (it is set to 360° by default), and the radius 1 and 2 correspond to base and top radius of the truncated cone.
Parameters
- Radius 1 - radius of the arc or circle defining the lower face
- Radius 2 - radius of the arc or circle defining the upper face
- Height - the height of the Part Cone
- Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.
Proprietà
File:PartConeProperty it.png |
VistaSono disponibili le Proprietà standard di visualizzazione. Dati
|