Part: Controlla la geometria

From FreeCAD Documentation
Revision as of 16:38, 6 May 2022 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Controlla geometria‏‎

Posizione nel menu
Part → Controlla geometria
Ambiente
Part
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Nessuno

Description

Descrizione

Lo strumento di controllo della geometria consente di verificare se si dispone di un solido valido

Utilizzo

  1. Selezionare una parte (attenzione a selezionare l'intera parte e non solo una faccia per verificare la validità del solido)
  2. Invocare il comando in uno dei seguenti modi:
    • Con il pulsante della barra delle booleane di Part.
    • Usando Part → Controlla la gometria dal menu principale.

I risultati sono riportati nella scheda Azioni.

Options

Skip settings page

If ticked, subsequent invocations of the tool skip showing the Settings task panel.

Run BOP check

La funzione Controlla geometria verifica se il Boundary representation (BRep o B-rep) del modello è valido. Oltre a questo controllo BRep, è possibile avere un controllo BOP aggiuntivo BOP (BOP= Boolean OPerations).

Log errors

If ticked, any errors found are also logged in the report view. introduced in version 0.19

Shape Content

In addition to detecting potential geometry errors, this tool shows a range of properties regarding the selected object:

  • Checked object
  • Shape type
  • Number of geometric entities: vertices, edges, wires, faces, shells, solids, compsolids, compounds, total shapes
  • Geometric and mass properties:
    • Area
    • Volume
    • Mass
    • Length
    • Center of mass
    • Orientation
    • Symmetry axis
    • Symmetry point
    • Moments
    • First axis of inertia
    • Second axis of inertia
    • Third axis of inertia
    • Radius of gyration
    • Global placement

Notes

  • App Link objects linked to the appropriate object types and App Part containers with the appropriate visible objects inside can also be checked using this tool. For App Links the shape of the linked object is checked. For App Part containers the visible objects within are checked as compounds. introduced in version 0.20
  • FreeCAD has no methods to automatically repair geometry. If faults are detected the steps involved to create the model need to be examined and fixed manually.