Part Vérifier la géométrie

From FreeCAD Documentation
Revision as of 09:39, 9 July 2016 by Mario52 (talk | contribs) (Created page with "==Utilisation==")

Vérifier Géometrie de la Pièce‏‎

Emplacement du menu
Pièce → Vérifier la Géométrie
Ateliers
Pièce
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
Aucun

Présentation

L'outil de vérification de la géométrie vous permet de vérifier si vous avez un solide valide.

Utilisation

L'outil est disponible dans l'atelier Part sous le menu Pièce ou depuis le bouton dans la barre d'outils des opérations booléennes. Sélectionnez un pièce (attention de bien sélectionné l'objet en entier et pas juste une face pour vérifier la validité d'un solide) et lancez l'outil. Vous verrez les résultats dans le panneau des tâches.

Activer la vérification BOP

If you want to enable the extra BOP (BOP= Boolean OPerations) checks then follow these steps : Tools menu > Edit Parameters > Preferences > Mod > Part > CheckGeometry then in the right pane double click under Value for the RunBOPCheck parameter and set to true, then click Save to disk, close and restart. See the screenshot below.

If the parameter or folder does not exist, you can create by

  • choosing "Tools > Edit Parameters ..." from the top menu
  • unfold the group "Preferences"
  • unfold the group "Mod"
  • unfold the group "Part"
  • right-cklick on part and choose "Add sub-group"
  • name the sub-group "CheckGeometry"
  • make sure the (just created) sub-group "CheckGeometry" is selected and right-click in the RIGHT (empty) window and choose "New Boolean Item"
  • name the new boolean item "RunBOPCheck" and make sure it is set to "true"


File:PartCheckGeometry.png

Run Check and interpret results

  • select in the tree view one or more objects you like to check
  • click on
  • you will get a report on the left side of the screen showing the result of the scan
  • if your scan turned up errors you may click in the report window on a specific error message and the corresponding geometric object (edge/face ...) will be highlighted in the 3D view
  • at the moment FreeCAD has no automatic repair methods for solids, so you need to look at the steps used in FreeCAD to model this specific geometry and try to fix the error yourself