Куб

From FreeCAD Documentation
Revision as of 12:45, 29 August 2021 by Evgeniy (talk | contribs)

Куб

Системное название
Part_Box
Расположение в меню
Деталь → Примитивы → Куб
Верстаки
Part
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Создать примитивы

Описание

Команда Куб из верстака Part добавляет параметрический геометрический примитив [1] в текущий документ. По умолчанию, команда добавляет куб с ярлыком "Куб" со сторонами 10х10х10 мм и располагает его в центре системы координат. Эти параметры могут быть изменены после добавления объекта.

Part_Box

Использование

  1. Переключитесь на верстак Part
  2. Существует несколько способов вызова команды:
    • Нажмите на иконку куба на панели инструментов.
    • Выберите из меню Деталь → Примитивы → Куб.

Result: The default result is a box with an equal length, width and height of 10 mm. It is attached to the global xy-plane and one edge is coincident with the global z-axis.

The box properties can later be edited, either in the property editor or by double-clicking on the box in the model tree.

Properties

Base

  • ДанныеPlacement: Specifies the orientation and position of the Box in the 3D space. See Placement. The reference point is the left front lower corner of the box.
  • ДанныеLabel: Label given to the Box object. Change to suit your needs.

Box

  • ДанныеLength: The length parameter is the Box's dimension in the x-direction.
  • ДанныеWidth: The width parameter is the Box's dimension in the y-direction.
  • ДанныеHeight: The height parameter is the Box's dimension in the z-direction.

Part_Box-Properties

Scripting

The Box command can by used in macros and from the python console using the following function:

FreeCAD.ActiveDocument.addObject("Part::Box", "myBox")
  • Where "myBox" is the label for the Box object.
  • Returns newly created object of type Box.

You can access and modify attributes of the Box object. For example, you may wish to modify the length, width and height parameters.

FreeCAD.ActiveDocument.myBox.Length = 25
FreeCAD.ActiveDocument.myBox.Width = 15
FreeCAD.ActiveDocument.myBox.Height = 30

You can change its placement with:

FreeCAD.ActiveDocument.myBox.Placement = FreeCAD.Placement(FreeCAD.Vector(4, 6, 3), FreeCAD.Rotation(30, 45, 10))