Part Booleans

From FreeCAD Documentation
Revision as of 21:34, 20 September 2020 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎română • ‎svenska • ‎čeština • ‎русский • ‎日本語
Arrow-left.svg Previous: Part Shapebuilder.svg Shapebuilder
Next: Union Part Fuse.svg Arrow-right.svg

Part Booleans.svg Booleans

Menyplacering
Part → Booleans
Arbetsbänk(ar)
Del, Komplett
Standard genväg
None
Introducerad i version
-
Se även
Union, Common and Cut


Detta kommando är ett allt-i-ett booleskt verktyg. Det tillåter dig att specificera vilken operation som ska utföras och vilka parametrar som ska användas via dialogen nedan. För snabbare booleska operationer, se även Förena, Gemensamt och Klipp.

Part Boolean.svg Part Boolean is a generic all-in-one boolean tool. It allows you to specify the objects and operation to perform via a single dialog.

For quicker access to these operations, use Part Fuse.svg Part Union, Part Common.svg Part Common, Part Cut.svg Part Cut, and Part Section.svg Part Section.

PartBooleansDialog.png

Dialog to select objects and perform boolean operations with them.


Usage

See the individual commands:

See also Part → Refine Shape

Coplanar problems

The boolean operations are performed by the internal geometry kernel, OpenCASCADE Technology (OCCT). This library sometimes has problems producing boolean results when the input objects share an edge or a face. To be sure the boolean operation is successful the recommendation is that the shapes intersect each other clearly; this means that in most cases, one shape should protrude or be larger in size than the other shape.

In cases of coplanarity, even if the first boolean operation succeeds, subsequent boolean operations may fail. In this case, the problem may not be in the last operation done, but in the older ones, that is, in the nested operations as indicated in the tree view. To troubleshoot these issues, it is recommended to use the Part CheckGeometry.svg Part CheckGeometry tool to inspect all objects for problems.

Part Boolean cut coplanar 1.png

Part Boolean cut coplanar 2.png

Left: shapes that share a face, a boolean cut may produce incorrect results. Right: shapes that intersect each other clearly, the boolean cut will be successful in most cases.


Part Boolean fusion coplanar 1.png

Part Boolean fusion coplanar 2.png

Left: shapes that share a face, a boolean union may produce incorrect results. Right: shapes that intersect each other clearly, the boolean union will be successful in most cases.


Arrow-left.svg Previous: Part Shapebuilder.svg Shapebuilder
Next: Union Part Fuse.svg Arrow-right.svg