Part Booleans

Other languages:

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Shapebuilder

Union

Part

Ubicación en el Menú
Part Booleans
Part → Booleans
Entornos de trabajo
Part
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
Part Union, Part Common and Part Cut

Este comando es una herramienta genérica todo-en-uno de operaciones booleanas. Te permite especificar que operación realizar y que parámetros utilizar a través del letrero de diálogo de abajo. Para operaciones booleanas, mira también Part Union, Part Common y Part Cut.

This command is a generic all-in-one boolean tool. It allows you to specify what operation to perform and what parameters to use via the dialog below. For quicker boolean operations, see also Part Union, Part Common, Part Cut, and Part Section.

Usage

See the individual commands:

Coplanar problems

The boolean operations are performed by the internal geometry kernel, OpenCASCADE Technology (OCCT). This library sometimes has problems producing boolean results when the input objects share an edge or a face. To be sure the boolean operation is successful the recommendation is that the shapes intersect each other clearly; this means that in most cases, one shape should protrude or be larger in size than the other shape.

In cases of coplanarity, even if the first boolean operation succeeds, subsequent boolean operations may fail. In this case, the problem may not be in the last operation done, but in the older ones, that is, in the nested operations as indicated in the tree view. To troubleshoot these issues, it is recommended to use the Part CheckGeometry tool to inspect all objects for problems.

Left: shapes that share a face, a boolean cut may produce incorrect results. Right: shapes that intersect each other clearly, the boolean cut will be successful in most cases.

Left: shapes that share a face, a boolean union may produce incorrect results. Right: shapes that intersect each other clearly, the boolean union will be successful in most cases.

Shapebuilder

Union

Part