Środowisko pracy Projekt Części

From FreeCAD Documentation
Revision as of 16:00, 21 April 2019 by Tomaszkowalczyk94 (talk | contribs) (Created page with "Narzędzia warsztatu Part Design są umieszczone w pasku narzędziowym pod pozycją "PartDesign".Pojawi się ona dopiero po wybraniu warsztatu Part Design")

Razem z wydaniem wersji release FreeCAD-a, warsztat PartDesign został zmieniony. Ten dokument opiera się o nową wersje programu. Dla wersji 0,16 jest strona PartDesign Legacy.

Wprowadzenie

Warsztat PartDesign ma wiele zaawansowanych narzędzi za pomocą których możesz zamodelować złożone części. Skupia się on na tworzeniu części mechanicznych, które mogą być następnie złożone w końcowy produkt. Niemniej jednak utworzone bryły mogą być używane do innych celów np architectural design, FEM analysis, lub druk 3d.

PartDesign Workbench jest nierozerwalnie związany z warsztatem Sketcher. Użytkownik zazwyczaj tworzy szkic (sketch), a następnie używa narzędzia PartDesign Pad które służy do "wyciągnięcia" i utworzenia podstawowej bryły, a następnie ta bryła jest dalej modyfikowana.

Podczas gdy warsztat Part opiera się na [1] (CSG) do budowania kształtów, PartDesign używa modelowania parametrycznego, co oznacza podstawowa bryła jest przekształcana przez dodawanie nowych elementów, do momentu uzyskania końcowego kształtu. Zobacz stronę funkcje edycji dla głębszego poznania tematu, a następnie zobacz tutorial Tworzenie prostych części w PartDesign aby zacząć tworzenie bryły.

Narzędzia

Narzędzia warsztatu Part Design są umieszczone w pasku narzędziowym pod pozycją "PartDesign".Pojawi się ona dopiero po wybraniu warsztatu Part Design

Structure tools

These are tools to organize the Model tree.

  • Part: adds a new Part container in the active document and makes it active.
  • Group: adds a Group in the active document's Model tree.

These are tools to organize the Model tree.

  • Part: adds a new Part container in the active document and makes it active.
  • Group: adds a Group in the active document's Model tree.

Part Design Helper tools

  • Create body: Creates a Body in the active document and makes it active.
  • Create sketch: creates‎ a new sketch on a selected face or plane. If no face is selected while this tool is executed, the user is prompted to select a plane from the Tasks panel. The interface then switches to the Sketcher_Workbench in sketch editing mode.
  • Map sketch to face: Maps a sketch to a previously selected plane or a face of the active body.

Part Design Modeling tools

Datum tools

Additive tools

These are tools for creating base features or adding material to an existing solid body.

  • Pad: extrudes a solid from a selected sketch.
  • Revolution: creates a solid by revolving a sketch around an axis. The sketch must form a closed profile.
  • Additive loft: creates a solid by making a transition between two or more sketches.
  • Additive pipe: creates a solid by sweeping one or more sketches along an open or closed path.

Subtractive tools

These are tools for subtracting material from an existing body.

  • Pocket: creates a pocket from a selected sketch.
  • Hole: creates a hole feature from a selected sketch. The sketch must contain one or multiple circles.
  • Groove: creates a groove by revolving a sketch around an axis.
  • Subtractive loft: creates a solid shape by making a transition between two or more sketches and subtracts it from the active body.
  • Subtractive pipe: creates a solid shape by sweeping one or more sketches along an open or closed path and subtracts it from the active body.

Transformation tools

These are tools for transforming existing features. They will allow you to choose which features to transform.

  • Mirrored: mirrors one or more features on a plane or face.
  • Linear Pattern: creates a linear pattern based on one or more features.

Dress-up tools

These tools apply a treatment to the selected edges or faces.

  • Fillet: fillets (rounds) edges of the active body.
  • Chamfer: chamfers edges of the active body.
  • Draft: applies an angular draft to selected faces of the active body.
  • Thickness: creates a thick shell from the active body and opens selected face(s).

Boolean

  • Boolean operation: imports one or more Bodies or PartDesign Clones into the active body and applies a Boolean operation.

Extras

Some additional functionality found in the Part Design menu:

  • Migrate: migrates files created with older FreeCAD versions. If the file is pure PartDesign feature-based, migration should succeed. If the file contains mixed Part/Part Design/Draft objects, the conversion will most likely fail.
  • Shaft design wizard: Generates a shaft from a table of values and allows to analyze forces and moments. The shaft is made with a revolved sketch that can be edited.
  • Involute gear: creates an involute gear profile that can be used by a Pad.

Contextual Menu tools

  • Set tip: redefines the tip, which is the feature exposed outside of the Body.
  • Move object after other object: allows reordering of the Body tree by moving the selected sketch, datum geometry or feature to another position in the list of features.

Preferences

Tutorials

Links