PartDesign Épaisseur

From FreeCAD Documentation
Revision as of 16:51, 1 March 2018 by Meme2704 (talk | contribs) (Created page with "==Comment l'utiliser==")
Jump to navigation Jump to search

PartDesign Thickness.svg PartDesign Thickness

Menu location
Part Design → Thickness
Default shortcut
Introduced in version
See also
Part Thickness


L'outil 'Thickness' travaille sur un corps solide et le transforme en un objet creux à paroi épaisse avec au moins une face ouverte, donnant à chacune de ses faces restantes une épaisseur uniforme. Sur certains solides, cela permet d'accélérer considérablement le travail et d'éviter les extrusions et les poches.

introduced in version 0.17

Comment l'utiliser

  1. Select one or more face(s) on the active Body.
  2. Press the PartDesign Thickness.png Thickness button.
  3. Define the Thickness parameters (see Options).
  4. To add more faces to open, press the Add face button and select a face in the 3D view.
  5. To remove a previously select face, press the Remove face button and select a face in the 3D view, or right-click on the Face label in the list and select Remove.
  6. Press OK.


  • Thickness: Wall thickness of the resulting object. Set the desired value.
  • Mode
    • Skin: Select this option if you want to get an item like a vase, headless but with the bottom
    • Pipe: Select this option if you want to get an object like a pipe, headless and bottomless. In this case it may be convenient to select the faces to be deleted before you start the tool. Helping with predefined views buttons or use the numeric keys.
    • Recto Verso:
  • Join Type
    • Arc: removes the outer edges and creates a fillet with a radius equal to the defined thickness.
    • Intersection: when faces are offset outward, sharp edges are kept between faces.
  • Make thickness inwards: when checked, faces are offset inward.


  • At least one face to be opened must be selected.
  • The thickness value may not exceed the smallest face height of the Body.
  • The command may fail with complex shapes.


  1. Create a Pad from the sketch
  2. Create a second sketch on the XY plane
  3. Create a second Pad from the second sketch

As in the following pictures:



Braga-secondo Pad.png


  1. Select a circular face
  2. Select PartDesign Thickness.png Thickness
  3. Add to the selection Face1, Face4 and Face5



Other languages:
Deutsch • ‎English • ‎Türkçe • ‎español • ‎français • ‎italiano • ‎polski • ‎português do Brasil • ‎română • ‎русский