PartDesign Évidement

From FreeCAD Documentation
Revision as of 16:51, 1 March 2018 by Meme2704 (talk | contribs) (Created page with "L'outil '' 'Thickness' '' travaille sur un corps solide et le transforme en un objet creux à paroi épaisse avec au moins une face ouverte, donnant à chacune de ses faces re...")
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

PartDesign Thickness

Menu location
Part Design → Thickness
Workbenches
PartDesign
Default shortcut
None
Introduced in version
-
See also
Part Thickness

Description

L'outil 'Thickness' travaille sur un corps solide et le transforme en un objet creux à paroi épaisse avec au moins une face ouverte, donnant à chacune de ses faces restantes une épaisseur uniforme. Sur certains solides, cela permet d'accélérer considérablement le travail et d'éviter les extrusions et les poches.

introduced in version 0.17

How to use

  1. Select one or more face(s) on the active Body.
  2. Press the Thickness button.
  3. Define the Thickness parameters (see Options).
  4. To add more faces to open, press the Add face button and select a face in the 3D view.
  5. To remove a previously select face, press the Remove face button and select a face in the 3D view, or right-click on the Face label in the list and select Remove.
  6. Press OK.

Options

  • Thickness: Wall thickness of the resulting object. Set the desired value.
  • Mode
    • Skin: Select this option if you want to get an item like a vase, headless but with the bottom
    • Pipe: Select this option if you want to get an object like a pipe, headless and bottomless. In this case it may be convenient to select the faces to be deleted before you start the tool. Helping with predefined views buttons or use the numeric keys.
    • Recto Verso:
  • Join Type
    • Arc: removes the outer edges and creates a fillet with a radius equal to the defined thickness.
    • Intersection: when faces are offset outward, sharp edges are kept between faces.
  • Make thickness inwards: when checked, faces are offset inward.

Limitations

  • At least one face to be opened must be selected.
  • The thickness value may not exceed the smallest face height of the Body.
  • The command may fail with complex shapes.

Example

  1. Create a Pad from the sketch
  2. Create a second sketch on the XY plane
  3. Create a second Pad from the second sketch

As in the following pictures:

File:Braga-primoPad.png

File:Braga-secondoschizzo.png

File:Braga-secondo Pad.png

Then

  1. Select a circular face
  2. Select Thickness
  3. Add to the selection Face1, Face4 and Face5

Result: